This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X90SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X90SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X90SCM (Discontinued) -> MBL40X90SCM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 90mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X90SCM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X90SCM is a discontinued double-acting aluminum mini round cylinder featuring a 40mm bore and a 90mm stroke. It delivers 628N of push force and 528N of pull force at 0.5 MPa, utilizing a G1/4 port and an M12x1.25 rod-end thread. The direct drop-in replacement is the MBL40X90SCM, which matches the exact bore, stroke, output force, port size, and mounting interface.
This specific SKU includes a built-in magnet (-S) for position sensing and a CM round-end back cover. The legacy MAL body uses threaded front and back covers, whereas the current MBL upgrade features a riveted rolling-packed body. Furthermore, the MAL -S magnet interfaces with the older CS1-M and DS1-M switches, while the MBL replacement transitions to the modern CMSG, DMSG, and EMSG sensor families.
| Model | AirTAC MAL40X90SCM (Discontinued) -> MBL40X90SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X90SCM |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X90SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X90SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×90 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Leveraging the 628N push force at 0.5 MPa and the CM round-end cover, this cylinder reliably ejects small plastic parts from injection molds, allowing the pivot to absorb slight misalignment during retraction.
The 90mm stroke and 528N pull force provide fast actuation for routing lightweight glass containers on a high-speed bottling line, while the G1/4 port ensures adequate airflow for rapid cycling.
Driven by the -S magnet for precise timing, this cylinder executes 90mm flap-folding motions on carton sealing machinery, confirming fold completion via a CS1-M sensor before the adhesive stage.
To replace the MAL40X90SCM, order the MBL40X90SCM and verify your 40mm bore, 90mm stroke, G1/4 port, and PT tapered thread form. Because this SKU includes a -S magnet and a CM round-end cover, you must update your stock of CS1-M or DS1-M sensors to the MBL-compatible CMSG, DMSG, or EMSG switches. If your application requires an adjustable air cushion rather than the fixed rubber bumper found on the MAL, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 32mm bore yields 402N of push force at 0.5 MPa, while stepping up is not an option as 40mm is the largest standard MAL mini round bore. A plain MAL or MBL cylinder will drift and drop its load if air pressure is lost, as the rubber bumper only softens the end of stroke and does not lock the rod; utilize an external rod lock or pilot-operated check valve for secure position holding.
Upgrade checklist
Yes, the MAL40X90SCM is discontinued. The exact drop-in replacement is the MBL40X90SCM, which maintains the same 40mm bore, 90mm stroke, 628N push force, G1/4 port, and CM round-end mounting. You will need to update your position sensors from the older CS1-M or DS1-M to the modern CMSG, DMSG, or EMSG switches.
The MAL40X90SCM operates on a 40mm bore with a G1/4 port and an M12x1.25 rod thread. At 0.5 MPa it provides 628N of push force and 528N of pull force. At 0.7 MPa the push force is 880N, and the maximum theoretical force is 128 kgf at 1.0 MPa. It relies on a fixed rubber bumper, not an adjustable cushion.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X90SCM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X90SCM replacement with price, stock and lead time, usually within 7-8 hours.