This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBLD20X60 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBLD20X60 in place of this model. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60 is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø20mm bore, so push and pull force are equal. This model is discontinued — the drop-in replacement is the MBLD20X60, matching bore, stroke, force and mounting.
- BoreØ20 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → MBLD20X60
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60
The AirTAC MALD20X60 is a discontinued double-acting, double-rod mini cylinder. A rod exits both ends of the 20 mm bore, producing exactly 132 N of force in both directions at 0.5 MPa. The direct drop-in replacement is the MBLD20X60, which matches the 60 mm stroke, G1/8 port, and mounting.
Because twin rods share the load, bearing life doubles and the assembly resists rotation without external guides. This MALD20X60 unit has no magnet, so it cannot accept position sensors; the MBLD20X60 upgrade also moves from threaded covers to a riveted rolling-packed body for greater structural integrity.
Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60 Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60 |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD20X60 |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD20X60 carries the same ratings.
Output Force — Equal Both Ways (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | 185 N |
| Max (@1.0 MPa) | 27 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD20X60 matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60 Is Used
PCB Depaneling Saw
Drives a circular blade with 132 N of equal force, using the twin rods to keep the cut perfectly straight and resist blade rotation.
Connector Insertion Jig
Pushes pin headers into housings from both sides simultaneously, relying on the dual 8 mm rods to prevent binding during the 60 mm travel.
Label Applicator Platen
Mounts a rear flag on the opposing rod to trip a mechanical valve, actuating the label feed without requiring an embedded magnetic sensor.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60 with MBLD20X60
To replace the MALD20X60 with the MBLD20X60, confirm the 20 mm bore, 60 mm stroke, G1/8 PT port, and FA or LB mounting. The original uses fixed rubber bumpers and has no back cover or SDB option. Since this SKU lacks the -S magnet, you lose switch capability unless you select an MBLD20X60S and use CMSG / DMSG / EMSG sensors instead of the older CS1-M / DS1-M.
Size on the equal 132 N force. If you need less power, step down to the smaller MALD15X60 (confirm from datasheet). If you need more push and pull, step up to the MALD25X60, which provides 206 N both ways at 0.5 MPa.
Upgrade checklist
- ✓ Order the MBLD20X60 (same bore/stroke/force)
- ✓ Force equal both ways (132 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD20X60 instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60 FAQ
Yes, the MALD20X60 is discontinued. The exact drop-in replacement is the MBLD20X60, which matches the 20 mm bore, 60 mm stroke, G1/8 port, and mounting. The MBLD20X60 upgrades the body to a riveted rolling-packed design but maintains the same force ratings.
This SKU has no -S magnet and cannot take a position sensor. Force is equal both ways: 132 N at 0.5 MPa, 185 N at 0.7 MPa, and a maximum of 27 kgf at 1.0 MPa. It uses a fixed rubber bumper, not an adjustable cushion or a load-holding lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBLD20X60 replaces this model 1:1.
Fast Dispatch
MBLD replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD20X60 → MBLD20X60)
Tell us the quantity and destination — we quote the drop-in MBLD20X60 replacement with price, stock and lead time, usually within 7-8 hours.