This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBLD25X60 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBLD25X60 in place of this model. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60 is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø25mm bore, so push and pull force are equal. This model is discontinued — the drop-in replacement is the MBLD25X60, matching bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- StatusDiscontinued → MBLD25X60
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60
The AirTAC MALD25X60 is a discontinued double-acting, double-rod mini cylinder. A Ø10 mm rod exits both ends of the 25 mm bore, yielding exactly 206 N of force in both push and pull directions at 0.5 MPa. The direct drop-in replacement is the MBLD25X60, which matches the 60 mm stroke, G1/8 port, and mounting footprint.
Because this specific SKU lacks the -S magnet code, it cannot accept a position sensor. The older MALD body uses threaded covers and CS1-M / DS1-M switches, whereas the MBLD25X60 upgrade features a riveted rolling-packed body and CMSG / DMSG / EMSG sensors. End-of-stroke energy is absorbed by a fixed rubber bumper, not an adjustable cushion.
Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60 Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60 |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD25X60 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD25X60 carries the same ratings.
Output Force — Equal Both Ways (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | 289 N |
| Max (@1.0 MPa) | 42 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD25X60 matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60 Is Used
PCB Depaneling Blade
Drives a synchronized cutting blade on an inline PCB router, using the twin rods to resist side loading and maintain a perfectly straight 60 mm cut.
Pick-and-Place Transfer
Shifts surface-mount components between conveyor lanes, using the equal 206 N push and pull force to accelerate and decelerate the tooling consistently.
Connector Insertion Head
Pushes rectangular automotive connectors into housings, relying on the anti-rotation twin rods to prevent binding during the 60 mm stroke.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60 with MBLD25X60
To replace this MALD25X60, specify MBLD25X60 and confirm the 25 mm bore, 60 mm stroke, G1/8 PT port, and FA or LB mounting. Since this SKU has no -S magnet, it cannot hold a sensor; if you need position detection on the new unit, add -S and migrate to CMSG / DMSG / EMSG switches. Size using the equal both-ways force: if 206 N at 0.5 MPa is insufficient, step up to the 32 mm bore (346 N); if you need less force, step down to the 20 mm bore (132 N).
Upgrade checklist
- ✓ Order the MBLD25X60 (same bore/stroke/force)
- ✓ Force equal both ways (206 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD25X60 instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60 FAQ
Yes, the MALD25X60 is discontinued. The exact drop-in replacement is the MBLD25X60, which matches the 25 mm bore, 60 mm stroke, and G1/8 port. You will need to mount it via the body, FA foot, or LB flange, as neither cylinder uses a back cover or SDB.
Push and pull forces are equal: 206 N at 0.5 MPa and 289 N at 0.7 MPa, with a maximum force of 42 kgf at 1.0 MPa. Because this specific MALD25X60 SKU lacks the -S magnet, it cannot accept a position sensor; the MBLD -S replacement uses CMSG / DMSG / EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBLD25X60 replaces this model 1:1.
Fast Dispatch
MBLD replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD25X60 → MBLD25X60)
Tell us the quantity and destination — we quote the drop-in MBLD25X60 replacement with price, stock and lead time, usually within 7-8 hours.