This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBLD32X175-S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBLD32X175-S in place of this model. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø32mm bore, so push and pull force are equal. This model is discontinued — the drop-in replacement is the MBLD32X175-S, matching bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke175 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- StatusDiscontinued → MBLD32X175-S
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S
The AirTAC MALD32X175-S is a discontinued double-acting, double-rod mini cylinder. A rod exits both ends of the 32 mm bore, generating equal force in both directions at 346 N each way at 0.5 MPa. The exact drop-in replacement is the MBLD32X175-S, matching the 175 mm stroke, G1/8 port, and mounting footprint.
This twin-rod design provides inherent anti-rotation resistance and doubles the bearing load for guided slides. The original MALD features threaded covers and a fixed rubber bumper, while the MBLD upgrade shifts to a riveted rolling-packed body. Your -S magnet variant currently uses CS1-M or DS1-M reed switches, which must change to the CMSG, DMSG, or EMSG families on the new MBLD unit.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD32X175-S |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD32X175-S carries the same ratings.
Output Force — Equal Both Ways (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD32X175-S matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×175 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S Is Used
PCB Depaneling Saw
Drives a synchronized cutting blade carriage on a printed circuit board router. The twin rods prevent blade yaw during the 175 mm traverse, ensuring a clean 346 N cut without rotation.
Textile Loom Beam Shift
Transfers heavy warp beams between creels. The equal both-ways 484 N force at 0.7 MPa securely pushes the beam onto the loom bracket and pulls the empty cradle back with identical power.
Packaging Lid Press
Seals tamper-evident carton lids. The rear rod carries a cam that triggers a CS1-M sensor, confirming the 175 mm press stroke completed before the conveyor indexes.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S with MBLD32X175-S
To replace the MALD32X175-S, specify the MBLD32X175-S and verify your bore, stroke, G1/8 port, and PT thread. The double-rod design mounts via the body, FA flange, or LB foot; there is no back-cover or SDB option. Size your load using the equal both-ways force: 346 N at 0.5 MPa or 484 N at 0.7 MPa. If you need less force, step down to the 25 mm bore (206 N at 0.5 MPa); if you need more, step up to the 40 mm bore (528 N at 0.5 MPa, which also upgrades the port to G1/4). At 175 mm, the extended twin rods add mass; ensure your guide carriage absorbs the lateral moment load to prevent premature seal wear.
Upgrade checklist
- ✓ Order the MBLD32X175-S (same bore/stroke/force)
- ✓ Force equal both ways (346 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD32X175-S instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S FAQ
Yes, the MALD32X175-S is discontinued. The exact drop-in replacement is the MBLD32X175-S. It matches the 32 mm bore, 175 mm stroke, G1/8 port, and force ratings. Note the sensor change: the old -S magnet used CS1-M/DS1-M switches, while the MBLD requires CMSG/DMSG/EMSG sensors.
Because it is a double-rod cylinder, the push and pull forces are equal: 346 N at 0.5 MPa and 484 N at 0.7 MPa, with a maximum force of 70 kgf at 1.0 MPa. It uses a fixed rubber bumper at each end of stroke for impact absorption; it does not have an adjustable cushion, and the bumper will not hold the load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBLD32X175-S replaces this model 1:1.
Fast Dispatch
MBLD replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD32X175-S → MBLD32X175-S)
Tell us the quantity and destination — we quote the drop-in MBLD32X175-S replacement with price, stock and lead time, usually within 7-8 hours.