This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBLD32X20 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBLD32X20 in place of this model. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20 is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø32mm bore, so push and pull force are equal. This model is discontinued — the drop-in replacement is the MBLD32X20, matching bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke20 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- StatusDiscontinued → MBLD32X20
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20
The AirTAC MALD32X20 is a discontinued double-acting, double-rod mini cylinder. A Ø12 mm rod exits both ends of the 32 mm bore, yielding equal push and pull force of 346 N at 0.5 MPa. The direct drop-in replacement is the MBLD32X20, matching the stroke, force, and G1/8 port.
This non-magnet SKU cannot accept a position sensor. The original MALD used threaded covers and CS1-M/DS1-M switches; the MBLD upgrade features a riveted rolling-packed body and CMSG/DMSG/EMSG sensors. Fixed rubber bumpers absorb end-of-stroke impact, and the twin rods prevent rotation for precise guided lifting.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20 Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20 |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD32X20 |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD32X20 carries the same ratings.
Output Force — Equal Both Ways (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD32X20 matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×20 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20 Is Used
PCB Drill Spindle Lift
Uses the 346 N equal force and twin rods to raise and lower a precision spindle without rotational drift, ensuring drill accuracy.
Label Applicator Tamp
Drives a tamp pad from both sides for non-twisting label placement on packaging lines, relying on the short 20 mm stroke.
Gripping Jaw Actuator
Powers a synchronized gripper mechanism where the rear rod simultaneously triggers a mechanical cam during the 20 mm travel.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20 with MBLD32X20
Replace this MALD32X20 with the MBLD32X20. Confirm the 32 mm bore, 20 mm stroke, PT G1/8 port, M10x1.25 rod thread, and FA/LB mounting (no back cover or SDB). Since this SKU lacks the -S magnet, you cannot mount a sensor; the MBLD upgrade requires CMSG/DMSG/EMSG switches. Size on the 346 N equal force: if undersized, step up to the 40 mm bore (528 N); if oversized, step down to the 25 mm bore (206 N).
Upgrade checklist
- ✓ Order the MBLD32X20 (same bore/stroke/force)
- ✓ Force equal both ways (346 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD32X20 instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20 FAQ
Yes, the MALD32X20 is discontinued. The exact drop-in replacement is the MBLD32X20, matching the 32 mm bore, 20 mm stroke, 346 N equal force, and G1/8 port.
Force is equal both ways: 346 N at 0.5 MPa, 484 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa. This specific SKU has no -S magnet, so it cannot take a position sensor; the MBLD replacement uses CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBLD32X20 replaces this model 1:1.
Fast Dispatch
MBLD replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD32X20 → MBLD32X20)
Tell us the quantity and destination — we quote the drop-in MBLD32X20 replacement with price, stock and lead time, usually within 7-8 hours.