This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBLD32X225 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBLD32X225 in place of this model. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225 is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø32mm bore, so push and pull force are equal. This model is discontinued — the drop-in replacement is the MBLD32X225, matching bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke225 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- StatusDiscontinued → MBLD32X225
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225
The AirTAC MALD32X225 is a discontinued double-acting, double-rod cylinder. A rod exits both ends, yielding equal push and pull force of 346N each way at 0.5MPa. The exact drop-in replacement is the MBLD32X225, matching the 32mm bore, 225mm stroke, G1/8 port, and mounting.
This unit has no -S magnet, so it cannot accept a position sensor. It uses fixed rubber bumpers instead of adjustable cushions. The original MALD features threaded covers, while the MBLD upgrade uses a riveted rolling-packed body. The twin rods resist rotation and double the bearing area for guided sliding.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225 Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225 |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD32X225 |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD32X225 carries the same ratings.
Output Force — Equal Both Ways (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD32X225 matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×225 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225 Is Used
PCB Edge-Guided Transfer
Moves printed circuit boards between inspection stations using the twin rods' anti-rotation resistance. The 346N equal force both ways ensures stable, non-skidding contact during the 225mm transfer.
Textile Loom Cam Actuation
Drives a rear-mounted cam on the extended back rod to time shedding motions. The 225mm stroke provides the wide traverse needed for weaving patterns without rotational play.
Plastic Film Wind-Up Cut-Off
Slices plastic film rolls on a guided slide. The double-rod design doubles the bearing area to handle the web tension, while the fixed rubber bumper absorbs the 346N end-of-stroke impact.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225 with MBLD32X225
Replace this MALD32X225 directly with the MBLD32X225. Confirm the 32mm bore, 225mm stroke, G1/8 port, and PT thread form. This SKU lacks a magnet, so it cannot take a sensor; if you need position detection, step up to an MBLD32X225S and use CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M. Mounting is FA or LB only; there is no back cover or SDB option.
Size using the equal-both-ways force of 346N at 0.5MPa. If you need less force, step down to the 25mm bore (206N at 0.5MPa). If you need more, step up to the 40mm bore (528N at 0.5MPa). At 225mm stroke, support the load to prevent rod side-loading and premature seal wear.
Upgrade checklist
- ✓ Order the MBLD32X225 (same bore/stroke/force)
- ✓ Force equal both ways (346 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD32X225 instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225 FAQ
Yes, the MALD32X225 is discontinued. The exact drop-in replacement is the MBLD32X225, which matches the 32mm bore, 225mm stroke, G1/8 port, and equal force. The MBLD upgrades the body to a riveted rolling-packed design from the original threaded covers.
The push and pull forces are equal: 346N at 0.5MPa, 484N at 0.7MPa, and a maximum of 70kgf at 1.0MPa. This specific MALD32X225 SKU has no -S magnet and cannot accept a position sensor. If detection is required, use an MBLD32X225S with CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBLD32X225 replaces this model 1:1.
Fast Dispatch
MBLD replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD32X225 → MBLD32X225)
Tell us the quantity and destination — we quote the drop-in MBLD32X225 replacement with price, stock and lead time, usually within 7-8 hours.