This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBLD40X350-S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBLD40X350-S in place of this model. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø40mm bore, so push and pull force are equal. This model is discontinued — the drop-in replacement is the MBLD40X350-S, matching bore, stroke, force and mounting.
- BoreØ40 mm
- Stroke350 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM12×1.25
- StatusDiscontinued → MBLD40X350-S
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S
The AirTAC MALD40X350-S is a discontinued double-acting, double-rod pneumatic cylinder. A 16 mm carbon-steel rod with 20 um hard chrome exits both ends of the 40 mm bore, yielding equal push and pull force of 528 N each way at 0.5 MPa. The drop-in replacement is the MBLD40X350-S, matching the 350 mm stroke, G1/4 port, and mounting.
This SKU includes the -S magnet for CS1-M or DS1-M reed switches; the MBLD upgrade uses CMSG, DMSG, or EMSG solid-state equivalents. The original MALD uses threaded covers, while the MBLD body is riveted and rolling-packed for higher structural rigidity. End-of-travel impact is absorbed by a fixed rubber bumper, as no adjustable cushion is present.
Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD40X350-S |
| Bore size | Ø40 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD40X350-S carries the same ratings.
Output Force — Equal Both Ways (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD40X350-S matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×350 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S Is Used
PCB Edge Conveyors
Drives a 350 mm guided slide in PCB edge conveyors. The twin rods resist rotation and handle the 528 N equal force needed to shift populated boards between SMT machines.
Textile Beam Lifting
Lifts and lowers textile warp beams. The rear rod carries a cam to trigger a limit switch, while the front rod applies 739 N at 0.7 MPa to tension the fabric web.
Packaging Carton Flaps
Syncopates folding carton flaps in a packaging line. The double-rod geometry provides dual bearing points to prevent binding over the 350 mm travel.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S with MBLD40X350-S
To replace the MALD40X350-S, order the MBLD40X350-S. Confirm the 40 mm bore, 350 mm stroke, PT G1/4 port, and M12x1.25 rod-end thread. Mounting uses an FA flange or LB foot on the body; there is no back-cover or SDB option. The -S magnet requires updating your sensor stock from CS1-M/DS1-M to CMSG/DMSG/EMSG.
Size on the equal-both-ways force: this bore delivers 528 N at 0.5 MPa and 739 N at 0.7 MPa. If you need less force, step down to the 32 mm bore (346 N at 0.5 MPa). As 40 mm is the largest MALD bore, there is no larger size available. Because the 350 mm stroke is long, ensure external guide rails carry the load to prevent rod side-load bending.
Upgrade checklist
- ✓ Order the MBLD40X350-S (same bore/stroke/force)
- ✓ Force equal both ways (528 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD40X350-S instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S FAQ
Yes, the MALD40X350-S is discontinued. The exact drop-in replacement is the MBLD40X350-S, which matches the 40 mm bore, 350 mm stroke, G1/4 port, and 528 N equal force. You will need to update your sensors: the MALD -S magnet uses CS1-M/DS1-M switches, while the MBLD uses CMSG/DMSG/EMSG.
The double-rod design means push and pull forces are equal because both sides have the same annulus area. The figures are 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa. Operating pressure is 0.1-1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBLD40X350-S replaces this model 1:1.
Fast Dispatch
MBLD replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD40X350-S → MBLD40X350-S)
Tell us the quantity and destination — we quote the drop-in MBLD40X350-S replacement with price, stock and lead time, usually within 7-8 hours.