This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBLJ40X225-30-S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBLJ40X225-30-S in place of this model. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S
The AirTAC Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 195 to 225 mm. This model is discontinued — the drop-in replacement is the MBLJ40X225-30-S.
- BoreØ40 mm
- Stroke225 mm
- Adjust window195–225 mm
- Port sizeG1/4
- Rod threadM12×1.25
- StatusDiscontinued → MBLJ40X225-30-S
About the Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S
The AirTAC MALJ40X225-30-S is a discontinued double-acting single-rod cylinder with a rear adjustable stroke stopper. It provides a usable extension window of 195-225 mm. The 40 mm bore generates 628 N push and 528 N pull at 0.5 MPa. The direct drop-in replacement is the MBLJ40X225-30-S, matching the bore, stroke, adjust code, and G1/4 port.
This -S SKU includes a magnet for CS1-M or DS1-M switches; the MBLJ replacement upgrades to CMSG, DMSG, or EMSG sensors. The original MALJ uses threaded covers, while the MBLJ features a riveted rolling-packed body. The rear adjuster sets the end position but does not hold load without live air. End impact is softened by a fixed rubber bumper, not an adjustable air cushion.
Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S Technical Specifications
| Model | Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ40X225-30-S |
| Bore size | Ø40 mm |
| Stroke | 225 mm |
| Adjustable window | 195 – 225 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ40X225-30-S carries the same ratings.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Single-rod force, same as a standard MAL of this bore. The MBLJ40X225-30-S matches these values.
Model Code: Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×225 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 195–225 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S Is Used
PCB Router Depth Stop
Dials the exact 195-225 mm reach on a PCB depaneling router. The 628 N push force holds the cutting head firmly against the stopper without needing external shims.
Carton Flap Folder
Adjusts the rear stroke window on a packaging line to fold varying corrugated carton depths. The fixed rubber bumper absorbs the repeated high-speed end impact.
Pneumatic Press Locator
Fine-tunes the lower end position on a light assembly press. The 30 mm trim window allows quick depth changes for different part heights without swapping hardware.
Replacing the Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S with MBLJ40X225-30-S
To replace this MALJ40X225-30-S, order the MBLJ40X225-30-S. Confirm the 40 mm bore, 225 mm stroke, 30 mm adjust code, G1/4 port, PT thread, and basic mounting. The -S magnet requires switching from CS1-M/DS1-M to CMSG/DMSG/EMSG sensors. The adjuster is a travel stop, not a lock. If sizing down, the 32 mm bore yields 402 N push at 0.5 MPa. If stepping up, there is no larger MALJ bore. For this 225 mm stroke, minimize side-load to prevent rod bending.
Upgrade checklist
- ✓ Order the MBLJ40X225-30-S (same bore/stroke/adjust)
- ✓ Same 195–225 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ40X225-30-S instead of this discontinued model.
Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S FAQ
Yes, the MALJ40X225-30-S is discontinued. The exact drop-in replacement is the MBLJ40X225-30-S, which matches the 40 mm bore, 225 mm stroke, 30 mm adjust code, and G1/4 port. You will need to upgrade your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG switches.
The 40 mm bore provides 628 N push and 528 N pull at 0.5 MPa, 880 N push at 0.7 MPa, and a maximum of 128 kgf at 1.0 MPa. The 30 mm adjust code creates a usable stroke window of 195-225 mm. The rear adjuster acts only as a travel stop and will not hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBLJ40X225-30-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ40 Adjustable Mini Cylinder MALJ40X225-30-S → MBLJ40X225-30-S)
Tell us the quantity and destination — we quote the drop-in MBLJ40X225-30-S replacement with price, stock and lead time, usually within 7-8 hours.