Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S
The AirTAC Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S is a genuine double acting + cushion (front mount) standard round-body mini air cylinder with a Ø32mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke400 mm
- Port size1/8"
- Acting typeDouble acting + cushion (front mount)
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S
At 400 mm of stroke this front-flange MAR still rides on a compact 32 mm stainless barrel, double acting and cushioned at both ends, driving 402 N of push at 0.5 MPa. The mounting flange is integral to the front cover, so machine builders bolt it on without buying or machining a separate bracket.
Variable needle cushions let you run the full 400 mm fast - up to 800 mm/s - and still land the load gently on both covers. Hard chrome over the carbon-steel 12 mm rod and a grease-holding two-way piston seal keep friction low over the long travel, while the standard piston magnet accepts CMSG, DMSG or EMSG switches anywhere along the barrel. Halve the 41 kg vertical-lift equivalent and you can spec it to raise about 20 kg with a comfortable 2:1 margin.
Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S Technical Specifications
| Model | Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting + cushion (front mount) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| F | Front-cover mount: F = front-flange mounting. |
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S Is Used
Hopper gate drop
Pulls a hopper outlet gate down 400 mm to release granulate into a weigher; 402 N at 0.5 MPa shears through bridging material.
Reject bin diverter
Swings a diverter chute over a reject bin under a case conveyor; the front flange fixes straight to the chute pivot plate.
Cable reel traverse
Traverses a winding guide across 400 mm on a spooling machine; the stainless barrel copes with the dust the line throws off.
Is the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S the Right Cylinder?
Bore choice against the 0.5 MPa numbers: 245 N for a 25 mm MAR, 402 N for this 32 mm, 628 N for the 40 mm. A 400 mm stroke magnifies any misalignment, so hinge or guide the load and fit I or Y knuckles on the M10x1.25 rod end where swivel is needed. Remember the piston is free when air is removed - the cushion only softens the stroke ends - so a rod lock is required wherever a raised load must stay up. Buyers wanting adjustable stroke or a double rod should look at the MACJ and MACD companions instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S FAQ
Push is 402 N and pull 346 N at 0.5 MPa; at 0.7 MPa expect 563 N push and 484 N pull; theoretical maximum 82 kgf at 1.0 MPa. Supply range is 0.15-1.0 MPa (22-145 psi), the 12 mm rod threads M10x1.25 and ports are 1/8 inch.
Yes - the speed window is 30-800 mm/s and the variable air cushion at each end is tuned with its needle screw, so you can approach at full speed and decelerate the load into the covers without metal-to-metal impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARF Stainless Steel Mini Air Cylinder MARF32X400S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.