Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S
The AirTAC Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S is a genuine double acting + cushion (front mount) standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting + cushion (front mount)
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S
Sixty millimetres of stroke in a 32 mm bore makes the MARF32X60S a mid-range workhorse in AirTAC's MA mini family: double acting, cushioned at both ends by adjustable air needles, and carried by its own riveted front-flange bracket, so mounting needs no extra foot or flange part. Ports are 1/8 in and the 12 mm rod is threaded M10x1.25. At 0.5 MPa this bore pushes 402 N, and 563 N at 0.7 MPa.
Dial the cushion needles in on first run and end-of-stroke shock stays off the covers even at the top of the 30-800 mm/s speed window - useful when a faster cycle must also stay quiet. Every unit ships with the piston magnet fitted, so CMSG, DMSG or EMSG reed switches click straight on. For sizing, treat 241 N (60 percent of the 402 N push figure) as the honest continuous load at 0.5 MPa (22-145 psi).
Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S Technical Specifications
| Model | Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion (front mount) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| F | Front-cover mount: F = front-flange mounting. |
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S Is Used
Assembly-bench press station
Presses bearings into housings at a benchtop station, using the cushioned 60 mm stroke to land each part without a bang.
Filling-line bottle stopper
Stops bottles on a filling machine infeed while the next batch indexes; 402 N push holds the line firmly at 0.5 MPa.
Stamping press part ejector
Kicks finished washers out of a small press die each cycle; reed switches confirm the ejector is home before the next stroke starts.
Is the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S the Right Cylinder?
For sizing, the 32 mm bore at 402 N push (0.5 MPa) sits between the 245 N of a 25 mm MAR and the 628 N of a 40 mm MAR - step down for lighter clamps, up for heavier presses. The front-flange bracket plus standard magnet make mounting and sensing a two-screw job with CMSG or DMSG switches. Note the piston will drift if air is lost; only a separate rod lock holds position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S FAQ
The 32 mm bore gives 402.2 N push and 345.6 N pull at 0.5 MPa, 563.0 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. Keep continuous duty near 241 N for a comfortable margin.
Adjust the needle screws at each end on first commissioning until end-of-stroke shock disappears within the 30-800 mm/s speed range. The piston magnet is fitted as standard, so CMSG, DMSG or EMSG switches clamp directly onto the barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARF Stainless Steel Mini Air Cylinder MARF32X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.