Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S
The AirTAC Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S is a genuine double acting + cushion (front mount) standard round-body mini air cylinder with a Ø50mm bore and 270mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke270 mm
- Port size1/4"
- Acting typeDouble acting + cushion (front mount)
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S
With 270 mm of cushioned travel, the MARF50X270S is a 50 mm bore, front-flange MAR: a stainless round barrel rolled into a sealed riveted body with aluminium covers and a hard-chrome plated 16 mm rod. Double acting by design, it extends with 981 N and retracts with 881 N at 0.5 MPa, while the needle screws at each end let you soften the arrival.
The mounting bracket is integral, so you bolt the front-cover flange straight to the machine and skip any separate flange or foot. Budget about 589 N of true working push at 0.5 MPa, six tenths of the rating, and note that the standard piston magnet means a CMSG, DMSG or EMSG switch can signal either end without modification.
Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S Technical Specifications
| Model | Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 270 mm |
| Acting type | Double acting + cushion (front mount) |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| F | Front-cover mount: F = front-flange mounting. |
| 50 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S Is Used
Wash-cabinet doors
Drives sliding doors on industrial wash cabinets; the stainless barrel tolerates the wet zone it works in.
Guard-door actuation
Opens and closes sliding machine guards on a CNC cell across the full 270 mm opening.
Hopper gate duty
Pushes the slide gate under a 200 L powder hopper, with the cushion easing the gate into its seat.
Is the Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S the Right Cylinder?
Force-wise the choice brackets like this: a 40 mm flange MAR pushes 628 N at 0.5 MPa, the 63 mm one 1558 N, and this 50 mm bore splits them at 981 N. A 270 mm stroke on a 16 mm rod means side loads should be guided by the machine, not the rod, or you risk bending and premature seal wear. Holding: if the air supply fails mid-stroke the rod will coast to wherever the load takes it, so a rod lock cylinder is the fail-safe answer. The integrated front flange needs no bracket kit, and the factory-fitted magnet pairs with CMSG, DMSG and EMSG switches for position checks along the travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S FAQ
Push at 0.5 MPa is 981.3 N and pull is 880.8 N; at 0.7 MPa push reaches 1373.8 N. The theoretical peak for this 50 mm bore is 200.1 kgf at 1.0 MPa. It operates on 0.15-1.0 MPa (22-145 psi) air, takes 1.5 MPa (215 psi) proof pressure, runs 30-800 mm/s, and the 270 mm stroke is standard within the 500 mm limit.
No. The F code means the front-flange bracket is part of the front cover itself, so the cylinder bolts directly to the machine; MAR does not take separate FA, LB or SDB feet. I and Y rod knuckles still thread onto the 16 mm M14x1.5 rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARF Stainless Steel Mini Air Cylinder MARF50X270S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.