Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S
The AirTAC Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S is a genuine double acting + cushion (front mount) standard round-body mini air cylinder with a Ø50mm bore and 350mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting + cushion (front mount)
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S
With a 350 mm stroke on a 50 mm bore, the MARF50X350S delivers up to 981.3 N of push at 0.5 MPa and 1373.8 N at 0.7 MPa, double acting with a variable air cushion at each end. Its front-flange bracket is formed into the riveted aluminium-alloy front cover, so the cylinder bolts straight to the machine frame without a separate flange or foot. Air at 0.15-1.0 MPa (22-145 psi) drives the rod across 30-800 mm/s.
The body is a high-precision stainless-steel barrel with a 16 mm hard-chrome plated rod (20 um), rolled onto the covers as a sealed round-body unit - this is AirTAC's own MA-series mini cylinder, not an ISO-design clone. In damp, washdown or outdoor spots it shrugs off the mild corrosion that pits painted-steel minis. When planning loads, budget about 589 N of real working force at 0.5 MPa, which is close to 50 kg of vertical lift with a 2:1 margin, and count on the standard piston magnet to run CMSG, DMSG or EMSG switches.
Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S Technical Specifications
| Model | Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion (front mount) |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| F | Front-cover mount: F = front-flange mounting. |
| 50 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S Is Used
Washdown gate slide
Drives a product gate on a dairy conveyor CIP line, where the stainless barrel shrugs off daily caustic rinse.
Bakery tray ejector
Pushes bread trays off a rack loader; the variable cushion lands each 350 mm throw softly at line speed.
Brewery hopper gate
Opens and closes a brewery tank hopper gate, lifting around 50 kg vertically with a 2:1 margin.
Is the Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S the Right Cylinder?
Compare with the 40 mm bore (628.3 N push at 0.5 MPa) if the job is lighter, or step to the 63 mm bore (1557.9 N) for heavier thrust; both stay in the same MA family. A 350 mm stroke carries side-load risk: keep the load guided on external rails so the long rod only sees tension or compression. Note also that a plain MAR drifts if air is lost - the cushion only softens the stroke end, so add a rod lock where position must be held. Mounting is the integrated F front flange, I or Y rod knuckles still thread onto the M14x1.5 male rod, and 1/4" ports feed both chambers.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S FAQ
At 0.5 MPa it pushes 981.3 N and pulls 880.8 N; at 0.7 MPa push rises to 1373.8 N. The theoretical maximum at 1.0 MPa is 200.1 kgf. Ports are 1/4", the rod is 16 mm with M14x1.5 male thread, and the bore is 50 mm with 350 mm stroke.
Adjust the needle screws on both end caps during first run-up to soften the stroke ends across the 30-800 mm/s speed range. The magnet is built in as standard, so CMSG, DMSG or EMSG switches can be clipped on the barrel anytime to signal end positions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARF Stainless Steel Mini Air Cylinder MARF50X350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.