Airtac MARU Stainless Steel Mini Cylinder MARU25X270S
The AirTAC Airtac MARU Stainless Steel Mini Cylinder MARU25X270S is a genuine double acting + cushion (up mount) standard round-body mini air cylinder with a Ø25mm bore and 270mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ25 mm
- Stroke270 mm
- Port size1/8"
- Acting typeDouble acting + cushion (up mount)
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MARU Stainless Steel Mini Cylinder MARU25X270S
Long travel in a mini format: the MARU25X270S stretches a 25 mm bore over 270 mm inside a rolled stainless-steel barrel, with the up-mount bracket riveted into the front cover so a single bolted joint does the job of cylinder plus flange. Double-acting air drives the piston both ways, and needle-adjustable cushions at each end let you soften the landings during first commissioning.
Force at 0.5 MPa is 245 N on the push stroke - about 147 N once you reserve margin for real work - and the same bore will lift roughly 12 kg vertically at a 2:1 design ratio. The hard-chrome carbon-steel rod resists washdown and humidity far better than painted minis, and because the magnet ships standard, CMSG / DMSG / EMSG switches drop straight on for position feedback along the full 270 mm travel.
Airtac MARU Stainless Steel Mini Cylinder MARU25X270S Technical Specifications
| Model | Airtac MARU Stainless Steel Mini Cylinder MARU25X270S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 270 mm |
| Acting type | Double acting + cushion (up mount) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARU Stainless Steel Mini Cylinder MARU25X270S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| U | Front-cover mount: U = up (top) mounting. |
| 25 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARU Stainless Steel Mini Cylinder MARU25X270S Is Used
Parcel diverter gate
Swing a sorting gate across a 270 mm conveyor lane to divert parcels between two chutes; 245 N at 0.5 MPa moves the gate even with light parcel contact against it.
Tray stack lifter
Raise a pile of bakery trays off a lower shelf - this bore equals about 12 kg of vertical lift at a 2:1 margin, enough for a loaded tray stack of that size.
Oven lid assist
Open the hinged lid of a benchtop curing oven through its full travel with a lever linkage; tune the cushion needle so the lid glides to the end stop instead of banging.
Is the Airtac MARU Stainless Steel Mini Cylinder MARU25X270S the Right Cylinder?
With 270 mm of stroke, side loads matter: guide the load externally or keep thrust in line with the rod, because a 10 mm rod unsupported over a long span will bend under offset force. Compare neighbours at the same 0.5 MPa supply - the 20 mm bore gives 157 N and the 32 mm bore gives 402 N, against 245 N here. Lost air means the rod will drift rather than hold, so fit a rod-lock cylinder for suspended loads. The front up-bracket is integral, so no separate flange part number is needed, and the standard magnet accepts CMSG / DMSG / EMSG switches at any point on the barrel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARU Stainless Steel Mini Cylinder MARU25X270S FAQ
Expect 245.3 N of push and 206.1 N of pull at 0.5 MPa, climbing to 343.4 N and 288.5 N at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa. The bore is 25 mm, the rod 10 mm threaded M10x1.25, the ports 1/8", and it runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s between -20 and +70 C.
Yes for mild exposure. The barrel is stainless steel rather than painted steel or aluminium, the covers are corrosion-resistant aluminium alloy, and the rod carries a 20 um hard-chrome plate. That combination tolerates damp food-line splashes and outdoor humidity far better than painted minis; keep high-pressure jetting and aggressive solvents off the seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARU Stainless Steel Mini Cylinder MARU25X270S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.