Airtac MARU Stainless Steel Mini Cylinder MARU32X10S
The AirTAC Airtac MARU Stainless Steel Mini Cylinder MARU32X10S is a genuine double acting + cushion (up mount) standard round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion (up mount)
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MARU Stainless Steel Mini Cylinder MARU32X10S
A 10 mm stroke makes the MARU32X10S a natural kicker and ejector: quick, repeatable part push-off where long travel would waste space. Bore 32 delivers 402 N push and 345.6 N pull at 0.5 MPa, plenty for ejecting steel parts from a fixture or nest. The round barrel is stainless steel riveted to aluminium covers over a hard-chrome plated rod, so washdown and damp shop air do not eat it the way they chew painted minis.
It is double acting with a variable air cushion and carries its own top (U) bracket, so there is no separate foot or flange to order. Run pressure is 0.15-1.0 MPa (22-145 psi) and speed spans 30-800 mm/s. For sizing, budget about 241 N of usable push at 0.5 MPa - roughly 60 percent of the 402 N rating - so seals, friction and margin are covered. The magnet is built in as standard for CMSG, DMSG and EMSG switches.
Airtac MARU Stainless Steel Mini Cylinder MARU32X10S Technical Specifications
| Model | Airtac MARU Stainless Steel Mini Cylinder MARU32X10S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion (up mount) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARU Stainless Steel Mini Cylinder MARU32X10S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| U | Front-cover mount: U = up (top) mounting. |
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARU Stainless Steel Mini Cylinder MARU32X10S Is Used
Fixture part ejector
Pops machined collars out of a soft-jaw nest after turning; 402 N of push delivered in just 10 mm of travel breaks the part free without disturbing the setup.
Rotary index lock pin
Drives a locking pin into the index plate of a rotary fixture table - the short 10 mm stroke keeps pin engagement positive, fast and repeatable cycle after cycle.
Checkweigher stopper
Acts as the stop-and-present blade under a checkweigher infeed, popping up in 10 mm to halt one bottle while the next queues behind it on the gravity roller.
Is the Airtac MARU Stainless Steel Mini Cylinder MARU32X10S the Right Cylinder?
At 402.2 N push (0.5 MPa) this bore 32 sits between the bore 25 MAR at 245.3 N and the bore 40 at 628.3 N - drop or step up according to the fixture load. With only 10 mm of travel, concentricity matters: align the tooling so the 12 mm rod sees no side load. Like any plain MAR it will not hold position on air loss; add a rod lock where the load must stay. The integrated top bracket mounts straight to the frame, and the standard magnet suits CMSG / DMSG / EMSG switch drops.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARU Stainless Steel Mini Cylinder MARU32X10S FAQ
At 0.5 MPa it delivers 402.2 N push and 345.6 N pull; at 0.7 MPa, 563.0 N push and 483.8 N pull; maximum theoretical force is 82 kgf at 1.0 MPa. The fluid is air filtered to 40 um, and the 10 mm stroke runs from 30 to 800 mm/s.
Yes - every MA-series cylinder carries a built-in magnet as standard, so CMSG, DMSG and EMSG switches clamp straight onto the stainless barrel without a special piston or factory reorder. Only the switch itself is ordered separately.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARU Stainless Steel Mini Cylinder MARU32X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.