Airtac MARU Stainless Steel Mini Cylinder MARU32X200S
The AirTAC Airtac MARU Stainless Steel Mini Cylinder MARU32X200S is a genuine double acting + cushion (up mount) standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting + cushion (up mount)
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MARU Stainless Steel Mini Cylinder MARU32X200S
The MARU32X200S pairs a 32 mm bore with a 200 mm stroke in a round stainless-steel barrel riveted to aluminium covers - a rolling-packed mini cylinder that shrugs off mild corrosion and washdown in damp food or outdoor spots better than painted minis. It is double acting with a variable air cushion at both ends, and the U in the code means the front bracket for top mounting is already on the body, so no separate flange or foot is ordered.
At 0.5 MPa it pushes with 402 N and pulls with 346 N; at 0.7 MPa push reaches 563 N. Plan on roughly 241 N of real work at 0.5 MPa rather than the full rating - that margin keeps a 200 mm stroke smooth across the 30-800 mm/s speed range. The magnet is built in as standard, so CMSG / DMSG / EMSG switches clip on for end-of-stroke signals.
Airtac MARU Stainless Steel Mini Cylinder MARU32X200S Technical Specifications
| Model | Airtac MARU Stainless Steel Mini Cylinder MARU32X200S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion (up mount) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARU Stainless Steel Mini Cylinder MARU32X200S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| U | Front-cover mount: U = up (top) mounting. |
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARU Stainless Steel Mini Cylinder MARU32X200S Is Used
Pick-and-place riser on a bottling line
Lifts a bottle-handling head of about 20 kg vertically at 0.5 MPa with a 2:1 margin, the 200 mm stroke clearing a 190 mm index step.
Glue-press ram in a plywood workshop
The 402 N push at 0.5 MPa holds veneer sheets flat while glue cures; the cushion needles tune the ram to land without bounce.
Index stop on a conveyor diverter
A CMSG switch on the stainless barrel confirms full extension before the PLC releases the next carton onto the diverter.
Is the Airtac MARU Stainless Steel Mini Cylinder MARU32X200S the Right Cylinder?
A bore 25 MAR cylinder manages only 245 N at 0.5 MPa and a bore 40 unit jumps to 628 N, so the 32 mm barrel suits mid-range jobs pushing around 400 N. If the machine must hold position through a power cut, add a rod lock - this cylinder drifts when air is lost. The integrated top bracket bolts the 200 mm barrel flat against a machine plate; keep side load low on a body this long or guide the load on external rails. CMSG or EMSG switches drop straight onto the barrel since the magnet ships fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARU Stainless Steel Mini Cylinder MARU32X200S FAQ
At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa the figures are 563 N push and 484 N pull; the theoretical maximum at 1.0 MPa is 82 kgf. Ports are 1/8 inch, the rod is 12 mm with an M10x1.25 male thread, and strokes to 500 mm are standard for this bore.
Turn the cushion needle screws in until end-of-stroke impact disappears, connect air to the 1/8 inch ports at 0.15-1.0 MPa (22-145 psi), and bolt down through the integrated top bracket. The piston drifts if air is lost, so add a rod lock where holding matters.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARU Stainless Steel Mini Cylinder MARU32X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.