Airtac MARU Stainless Steel Mini Cylinder MARU50X300S
The AirTAC Airtac MARU Stainless Steel Mini Cylinder MARU50X300S is a genuine double acting + cushion (up mount) standard round-body mini air cylinder with a Ø50mm bore and 300mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke300 mm
- Port size1/4"
- Acting typeDouble acting + cushion (up mount)
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MARU Stainless Steel Mini Cylinder MARU50X300S
Cover 300 mm of travel in a round mini body - the MARU50X300S works as a long-reach pusher at 981.3 N forward and 880.8 N back at 0.5 MPa (1373.8 N at 0.7 MPa). Because the top mount is integral to the front cover, alignment to the machine rail comes down to a single bolted joint.
Treat 589 N as the practical working push at 0.5 MPa - about 60 percent of the rating - and the cylinder will run cool and last. A riveted stainless barrel resists corrosion in damp plants, and the 0.15-1.0 MPa (22-145 psi) band tolerates sagging shop air. Needle screws on both cushions let you tune the final millimetres of travel, while the built-in magnet pairs with CMSG / EMSG / DMSG switches for end-position proof.
Airtac MARU Stainless Steel Mini Cylinder MARU50X300S Technical Specifications
| Model | Airtac MARU Stainless Steel Mini Cylinder MARU50X300S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 300 mm |
| Acting type | Double acting + cushion (up mount) |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARU Stainless Steel Mini Cylinder MARU50X300S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| U | Front-cover mount: U = up (top) mounting. |
| 50 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARU Stainless Steel Mini Cylinder MARU50X300S Is Used
Cross-transfer pusher
Moves cartons off a main line onto a spur conveyor, 300 mm of travel spanning even the widest SKU on the lane.
Stacker gate
Opens a safety gate at a palletiser infeed, the long stroke clearing forklift traffic without a bulky frame.
Inspection slide
Drives a measuring carriage over 300 mm in an inspection rig, magnet switches proving arrival at each end.
Is the Airtac MARU Stainless Steel Mini Cylinder MARU50X300S the Right Cylinder?
Two sizing paths: the 40 mm MAR bore (628.3 N at 0.5 MPa) fits lighter 300 mm pushes; the 63 mm bore (1557.9 N) suits heavier ones. At 300 mm of unsupported travel, side load is the real enemy - guide the load in slides or add external bearings to protect the rod and seals. The magnet is standard, so CMSG / DMSG / EMSG switches drop on for stroke-end signals. Note the piston will not hold position if air pressure drops; a rod lock handles that job.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARU Stainless Steel Mini Cylinder MARU50X300S FAQ
Design figures: 981.3 N push and 880.8 N pull at 0.5 MPa, 1373.8 N push and 1233.1 N pull at 0.7 MPa, and 200.1 kgf theoretical at 1.0 MPa. Pressure band 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
Both caps take 1/4 inch ports on this bore size, with a M14x1.5 male thread on the 16 mm rod. Run filtered air (40 um) between 0.15-1.0 MPa (22-145 psi) and -20 to +70 C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARU Stainless Steel Mini Cylinder MARU50X300S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.