Airtac MARU Stainless Steel Mini Cylinder MARU50X350S
The AirTAC Airtac MARU Stainless Steel Mini Cylinder MARU50X350S is a genuine double acting + cushion (up mount) standard round-body mini air cylinder with a Ø50mm bore and 350mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting + cushion (up mount)
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MARU Stainless Steel Mini Cylinder MARU50X350S
Long-travel work is where the MARU50X350S earns its place: a 50 mm double-acting MAR cylinder with 350 mm of stroke, the up-mount flange formed into the front cover, and a 30-800 mm/s speed band. Fed 0.15-1.0 MPa (22-145 psi), it produces 981 N of push and 881 N of pull at 0.5 MPa.
Its stainless round barrel shrugs off condensation and mild washdown that would blister a painted mini, while the 20 um hard-chrome plating keeps the rod's sealing surfaces smooth across the full 350 mm sweep. If you budget 60 percent of the rating, you can plan on about 590 N of real work at 0.5 MPa. The magnet comes fitted as standard, so DMSG or EMSG switches drop on for mid-stroke and end-position feedback.
Airtac MARU Stainless Steel Mini Cylinder MARU50X350S Technical Specifications
| Model | Airtac MARU Stainless Steel Mini Cylinder MARU50X350S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion (up mount) |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARU Stainless Steel Mini Cylinder MARU50X350S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| U | Front-cover mount: U = up (top) mounting. |
| 50 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARU Stainless Steel Mini Cylinder MARU50X350S Is Used
Guard door drive
Slide a 350 mm machine-guard door open and closed on a packaging line, with cushioned stops protecting the 981 N drive at each end.
Deep-die ejector
Kick formed parts out of a deep draw die where the ejector plate must travel the full 350 mm before it makes contact.
Cross-transfer pusher
Push cartons across a wide transfer table between two conveyor lanes, sized on roughly 590 N of usable push at 0.5 MPa.
Is the Airtac MARU Stainless Steel Mini Cylinder MARU50X350S the Right Cylinder?
Size check: a 40 mm bore gives 628 N at 0.5 MPa and a 63 mm bore gives 1558 N, so the 50 mm bore sits between them for this 350 mm travel. Over a stroke this long, keep side loads off the 16 mm rod - guide the load externally or the rod will bend. With air removed the piston floats freely; a rod lock is the fix if the load must hold mid-travel. The integrated top bracket needs no LB foot or separate flange, and I or Y knuckles fit the M14x1.5 thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARU Stainless Steel Mini Cylinder MARU50X350S FAQ
Force stays constant along the travel: 981 N push and 881 N pull at 0.5 MPa, climbing to 1374 N and 1233 N at 0.7 MPa, with about 200 kgf theoretical at 1.0 MPa. The 1/4" ports suit all 50 mm bores.
It holds nothing on its own - cut the air and the 16 mm rod drifts with the load, so fit a rod lock where position must persist. It also carries no internal side-load guide; align the load on the M14x1.5 thread and support it externally over the 350 mm travel. The needle-screw cushion only softens the last few millimetres at each end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARU Stainless Steel Mini Cylinder MARU50X350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.