Airtac MARU Stainless Steel Mini Cylinder MARU50X75S
The AirTAC Airtac MARU Stainless Steel Mini Cylinder MARU50X75S is a genuine double acting + cushion (up mount) standard round-body mini air cylinder with a Ø50mm bore and 75mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting + cushion (up mount)
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MARU Stainless Steel Mini Cylinder MARU50X75S
Need a 75 mm throw in a tight spot? The MARU50X75S pairs a 50 mm bore with an up-facing bracket, giving 981.3 N push and 880.8 N pull at 0.5 MPa (1373.8 N on extension at 0.7 MPa). The variable air cushion at each end is tuned with needle screws, so faster cycles or heavier tooling land softly instead of hammering the covers.
With its grease-retaining two-way piston seal and rolled stainless barrel, this riveted round-body unit keeps working in humid workshops where painted minis rust. On the extend stroke it can lift roughly 100 kg vertically, or plan around 50 kg when you want a 2:1 margin. Mounting is integral - the U front cover bolts to the machine directly - and the piston magnet that comes standard accepts CMSG / DMSG / EMSG switches.
Airtac MARU Stainless Steel Mini Cylinder MARU50X75S Technical Specifications
| Model | Airtac MARU Stainless Steel Mini Cylinder MARU50X75S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion (up mount) |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARU Stainless Steel Mini Cylinder MARU50X75S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| U | Front-cover mount: U = up (top) mounting. |
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARU Stainless Steel Mini Cylinder MARU50X75S Is Used
Box diverter on sortation chutes
75 mm of travel flips parcels between chutes; at 981.3 N the rod handles parcel weight without stalling mid-throw.
Weld-tip retainer on a small fixture
Pull force of 880.8 N at 0.5 MPa retracts the tip assembly while the top bracket anchors the cylinder to the gantry.
Dust-cap ejector on bottling machinery
The stainless tube survives syrupy, sticky splash zones, and the standard magnet feeds an EMSG switch for reject counting.
Is the Airtac MARU Stainless Steel Mini Cylinder MARU50X75S the Right Cylinder?
Compare before you buy: 40 mm gives 628.3 N at 0.5 MPa for lighter clamps, while 63 mm reaches 1557.9 N for stiffer work. The 75 mm throw is a standard length, well inside the 500 mm ceiling for this bore, but keep side loads off the 16 mm rod and guide the tooling externally. If your process must hold position through an air drop, this cylinder relaxes when pressure goes - a separate rod lock is the answer. All 50 mm bores connect via 1/4" ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARU Stainless Steel Mini Cylinder MARU50X75S FAQ
Push at 0.5 MPa is 981.3 N, pull 880.8 N. At 0.7 MPa expect 1373.8 N push and 1233.1 N pull, with a 200.1 kgf theoretical maximum at 1.0 MPa. Stroke is 75 mm on a 16 mm chrome rod with M14x1.5 thread, air connects via 1/4" ports, pressure spans 0.15-1.0 MPa (22-145 psi) and proof pressure is 1.5 MPa (215 psi).
Both end covers carry a variable air cushion. Turn the needle screws in or out during commissioning until the load decelerates smoothly - that lets you run up to 800 mm/s or carry heavier tooling without shock loading the aluminium covers. The cushion only softens the stroke ends; it is not a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARU Stainless Steel Mini Cylinder MARU50X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.