Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ25 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU
The AirTAC MBLC25X200SU is a double-acting, 25mm bore mini cylinder with a 200mm stroke, delivering 245 N push and 206 N pull force at 0.5 MPa. It features a screw-adjustable pneumatic air cushion at both stroke ends to smoothly decelerate the piston, cutting impact and vibration on faster moves where a fixed rubber bumper would fail. This compact actuator uses a riveted rolling-packed aluminum barrel for tight spaces rather than a bulky rebuildable tie-rod body.
The SKU includes an -S built-in magnet for CMSG, DMSG, or EMSG sensor switches to detect rod position, and a U flat-end rigid back cover. A heterogeneous two-way grease-retaining piston seal pairs with the 20 µm hard-chrome plated carbon-steel Ø10 mm rod to maintain lubrication and resist wear across long cycles. The cushion needle is tuned to match your load and speed, but it only decelerates near the ends—it is not a load lock or brake.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU Is Used
PCB Shuttle Pusher
Drives a 200mm shuttle stroke on a PCB handling line, using the adjustable cushion to stop the 245 N push force smoothly without jarring delicate populated boards.
Carton Flap Folder
Folds cardboard flaps on a compact packaging machine, where the -S magnet confirms the fully extended position via a DMSG sensor before the sealing head lowers.
Pallet Diverter Gate
Reroutes small product totes on a conveyor at speed, relying on the riveted aluminum body to fit the tight transfer gap while absorbing the 206 N pull load.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU the Right Cylinder?
If you need less force, the 20mm bore version offers 157 N push at 0.5 MPa; if your load is heavier, the 32mm bore provides 402 N push. Choose this MBLC over the base MBL when your application runs at high speed or cycles frequently, requiring tunable end-of-stroke deceleration rather than a fixed rubber bumper. At 200mm of stroke, the small Ø10 mm rod has low side-load tolerance, so use an external guide, a pivot mount, or the MBLD double-rod type to prevent rod bending. This cylinder has a G1/8 port, M10x1.25 rod thread, and PT threaded port. A plain MBLC does not hold position if air is lost—add an external rod lock or pilot-operated check for that.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU FAQ
At 0.5 MPa, this 25mm bore cylinder provides 245 N push and 206 N pull force. At 0.7 MPa, it delivers 343 N push. The maximum theoretical force is 50 kgf at 1.0 MPa operating pressure.
You tune the cushion needle at each end to match your load and speed. It traps exhaust air to decelerate the piston smoothly near the stroke ends, protecting the U flat-end cover from impact. It only decelerates; it is not a brake or load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC25X200SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.