Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA
The AirTAC MBLC32X160SCA is a double-acting aluminum mini cylinder with a 32mm bore and 160mm stroke. A built-in magnet (-S) enables position detection via CMSG reed or DMSG and EMSG solid-state switches. The CA back cover provides a pivot clevis that swings on a pin to accommodate arcing loads. Delivering 402N push and 346N pull at 0.5MPa, this compact actuator fits tight spaces where rigid mounting fails.
Unlike the base MBL fixed-bumper type, this MBLC variant features a screw-adjustable pneumatic cushion at both ends. You tune the needle to smoothly decelerate the piston near stroke limits, cutting end-cover impact and vibration on faster cycles. The riveted rolling-packed aluminum barrel keeps the body light, while the Ø12mm carbon-steel rod with 20µm hard-chrome plating pairs with a two-way grease-retaining piston seal for reliable service.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA Is Used
Textile Loom Let-Off
Drives the tensioning arm on a weaving loom, using the 160mm stroke and CA pivot to accommodate the slight arc of the feed mechanism while providing 402N of push force.
Packaging Flap Folder
Folds cardboard flaps at high speed on a cartoning machine, where the adjustable air cushion prevents harsh slamming that would damage the mechanical end covers.
PCB Shuttle Transfer
Moves populated circuit board trays between inspection stations, using the S magnet and a DMSG solid-state sensor to confirm the extended position instantly.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA the Right Cylinder?
At 0.5MPa, this 32mm bore yields 402N push and 346N pull. If your application requires less force, stepping down to the 25mm bore reduces output to 245N push. If you need to move heavier masses, the 40mm bore increases thrust to 628N push. The CA pivot back cover is specifically chosen to handle angular or arcing movements that would bind a rigid U flat-end mount. Remember that the adjustable air cushion only decelerates motion near the ends; it is not a brake. If you need to hold position without live air, add an external rod lock. This PT-threaded model uses a G1/8 port and M10x1.25 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA FAQ
This 32mm bore cylinder delivers 402N push and 346N pull at 0.5MPa, 563N push and 484N pull at 0.7MPa, with a maximum theoretical force of 82kgf at 1.0MPa.
The MBLC uses a screw-adjustable air cushion at both ends rather than a fixed rubber bumper. You tune the needle to smoothly decelerate the piston near the 160mm stroke limits, which is critical for reducing impact noise and protecting the end covers on faster or heavier moves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.