Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U
The AirTAC MBLC32X160U is a double-acting aluminum mini cylinder featuring a 32mm bore and 160mm stroke. It generates 402 N of push force and 346 N of pull force at 0.5 MPa, making it well-suited for mid-range linear actuation over a moderate travel distance. The defining feature of this MBLC variant is the screw-adjustable pneumatic cushion at both ends, which allows you to tune the end-of-stroke deceleration to match your specific load and speed, effectively minimizing impact shock and vibration.
This specific configuration includes a U flat-end back cover for rigid rear mounting and uses a standard PT port thread. The riveted rolling-packed aluminum barrel keeps the body compact and lightweight for tight machine spaces, while the 20 µm hard-chrome plated carbon-steel rod resists wear. Note that this SKU is supplied without a built-in magnet, meaning it cannot host CMSG, DMSG, or EMSG position sensors.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U Is Used
PCB Router Z-Axis
Drives a spindle carriage up and down on a PCB depaneling router, using the 160mm stroke to clear fixtures and the tuned cushion to prevent end-stop jarring during rapid indexing.
Carton Flap Folder
Actuates a folding arm on a packaging line to tuck minor flaps on corrugated cartons, utilizing the 402 N push force to overcome board resistance without crushing the box.
Pallet Diverter Gate
Pushes a diverter guide into a conveyor lane to redirect small product totes, relying on the adjustable end-cushion to softly decelerate the 160mm stroke and avoid slamming the aluminum frame.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U the Right Cylinder?
At 0.5 MPa, this 32mm bore yields 402 N push and 346 N pull. If your application requires less force, stepping down to the 25mm bore provides 245 N push and 206 N pull, whereas moving up to the 40mm bore offers 628 N push and 528 N pull for heavier loads. Choose the MBLC over the base MBL when your cycle speeds are high or the moved mass is significant enough that a fixed rubber bumper would fail to absorb the impact. The adjustable air cushion only governs end-of-stroke speed and does not lock the rod; if you need position holding without live air pressure, install an external rod lock or pilot-operated check valve. This U flat-end model provides a rigid rear mount, whereas a CA pivot cover is better for arcing loads. For replacement, match the 32mm bore, 160mm stroke, G1/8 port, M10x1.25 rod thread, PT thread form, and U back cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U FAQ
At 0.5 MPa, the 32mm bore provides 402 N of push force and 346 N of pull force. At 0.7 MPa, push increases to 563 N and pull to 484 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, this specific SKU lacks the built-in magnet (denoted by an -S suffix), so it cannot accept CMSG, DMSG, or EMSG sensor switches. If you require position detection, select the MBLC32X160SU variant instead, which includes the internal magnet for solid-state or reed switch mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X160U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.