Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA
The AirTAC MBLC32X200CA is a double-acting aluminum mini cylinder engineered with a screw-adjustable pneumatic cushion at both ends. It yields 402 N of push force and 346 N of pull force at 0.5 MPa, making this 200 mm stroke variant well-suited for mid-length linear actuation where smooth end-of-travel deceleration is critical. The CA pivot back cover allows the body to swing on a pin, accommodating arcing or lateral movements without binding.
This model incorporates a heterogeneous two-way grease-retaining piston seal paired with a 20 um hard-chrome plated carbon-steel rod to maintain lubrication and resist wear. Its riveted rolling-packed aluminum barrel keeps the overall envelope compact and lightweight. Because this specific SKU lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG electronic position sensing.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA Is Used
Textile Loom Guide
Drives the traversing yarn guide on a high-speed weaving loom, utilizing the 200 mm stroke and CA pivot to absorb angular path deviations while the air cushion prevents sudden jerks at stroke ends.
Pallet Transfer Diverter
Pushes packaging pallets onto an adjacent conveyor line, where the 402 N push force at 0.5 MPa moves the load and the tunable cushion eliminates end-cap hammering during rapid cycling.
Hinge Assembly Press
Closes a stamping die to crimp metal hinges, relying on the 346 N pull force to retract the tooling smoothly while the clevis mount prevents side-load binding on the 12 mm rod.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA the Right Cylinder?
At 0.5 MPa, this 32 mm bore generates 402 N push and 346 N pull. If your application requires less force, the next size down is the 25 mm bore offering 245 N push, while stepping up to the 40 mm bore provides 628 N push for heavier loads. Choose this MBLC variant over the base MBL when your cycle speeds are high enough that the fixed rubber bumper would degrade or cause impact shock. The adjustable needle valve lets you tune the end-of-stroke deceleration to match the load mass, though it acts only as a brake near the ends and will not hold the rod in place if air pressure is lost or the valve centers. For position holding without live air, an external rod lock or pilot-operated check valve is required. The 200 mm stroke approaches the threshold where side loads can cause rod bending; for this 12 mm rod, using the CA pivot mounting, an external guide, or switching to an MBLD double-rod cylinder will mitigate binding and extend seal life. The replacement match is bore 32, stroke 200, port G1/8, rod thread M10x1.25, PT thread form, CA back cover, no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA FAQ
This 32 mm bore cylinder delivers a push force of 402 N and a pull force of 346 N at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
The cushion is a screw-tunable pneumatic needle valve at both ends that traps exhaust air to decelerate the piston smoothly before impact, protecting the end covers on fast or heavy moves; it is not a load lock. Because this specific SKU lacks the -S suffix, it has no internal magnet and cannot be fitted with CMSG, DMSG, or EMSG position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.