Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U
The AirTAC MBLC32X200U is a double-acting aluminum mini cylinder engineered for compact actuation over a 200 mm stroke. It yields 402 N of push and 346 N of pull force at 0.5 MPa, scaling to 563 N push at 0.7 MPa. The defining trait of this MBLC variant is the screw-adjustable pneumatic cushioning at both ends, which decelerates the piston smoothly near stroke limits to absorb kinetic energy on faster moves.
This specific SKU features a U flat-end back cover for rigid rear mounting and uses a standard PT tapered port thread. The riveted rolling-packed aluminum barrel keeps the body light for tight spaces, while the 20 µm hard-chrome plated carbon-steel rod resists wear. Note that this configuration lacks a built-in magnet, meaning it cannot accept CMSG, DMSG, or EMSG position sensors.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U Is Used
Packaging Line Diverter
Pushes cartons at 500 mm/s onto a secondary packaging lane, relying on the adjustable cushion to halt the 402 N push force without slamming the rear cover.
PCB Handling Gate
Actuates a 200 mm routing gate on a PCB assembly conveyor, using the rigid U flat-end mount to maintain frame alignment during high-frequency indexing.
Textile Loom Guide
Shifts a yarn tensioning guide across a 200 mm path, where the tunable end-of-stroke deceleration prevents thread snap-back caused by sudden stops.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U the Right Cylinder?
For sizing context, stepping down to a 25 mm bore drops the 0.5 MPa push force to 245 N, while stepping up to a 40 mm bore increases it to 628 N. Choose this MBLC version over the base MBL when your cycle speeds or moving mass outpace the capabilities of a fixed rubber bumper. Keep in mind the adjustable needle only decelerates the piston near the ends; it is not a brake and will not hold the load if air pressure drops. To replace this unit exactly, match the 32 mm bore, 200 mm stroke, G1/8 port, M10x1.25 rod thread, PT thread form, and U back cover. Because the 200 mm stroke is substantial for a Ø12 mm rod, side-load tolerance is low; utilize an external guide or a pivot mount to prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force reaches 563 N and the pull force is 484 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
A screw-tunable needle at each end traps a pocket of exhaust air, decelerating the piston smoothly before impact. You tune it to match the load and speed, which protects the end covers on fast cycles. It is strictly an end-of-stroke damper, not a locking brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X200U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.