Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ32 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA
The AirTAC MBLC32X350SCA is a double-acting aluminum mini cylinder engineered for arcing loads, delivering 402 N of push force at 0.5 MPa. Its defining feature is a screw-adjustable pneumatic cushion at both stroke ends. By tuning the needle, you decelerate the piston smoothly near the extremes, significantly reducing end-cover impact and vibration on faster moves. It is a deceleration tool, not a load lock.
This 350 mm stroke variant uses a CA pivot back cover that swings on a pin to accommodate angular motion. The riveted rolling-packed barrel keeps the body compact, while the Ø12 mm carbon-steel rod features 20 µm hard-chrome plating to resist wear. The built-in magnet (-S) supports CMSG reed and DMSG/EMSG electronic sensors for precise position detection.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA Is Used
Textile Loom Let-Off
Drives a 350 mm tensioning lever on a weaving machine, using the CA pivot to absorb the arc while the cushion prevents thread-snapping jerks at stroke ends.
Package Sorting Diverter
Pushes parcels across a belt line; the 402 N force handles boxed goods while the adjustable cushion halts the 350 mm extension smoothly without banging.
PCB Conveyor Gating
Actuates a 350 mm routing gate on an electronics assembly line, relying on the -S magnet and DMSG sensor to confirm gate position for the PLC.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA the Right Cylinder?
Stepping down, the 25 mm bore offers 245 N push at 0.5 MPa for lighter payloads, while stepping up to the 40 mm bore yields 628 N for heavier mechanisms. Choose MBLC over the fixed-bumper MBL when cycling quickly with enough mass to warrant tunable end-of-stroke control. At 350 mm, the Ø12 mm rod has limited side-load tolerance; use the CA pivot to absorb arcing stress, add an external guide, or switch to an MBLD double-rod cylinder to prevent rod bending. This SKU uses a G1/8 port, PT thread, M10x1.25 rod end, and a CA clevis cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA FAQ
At 0.5 MPa it provides 402 N push and 346 N pull. At 0.7 MPa it provides 563 N push and 484 N pull. The maximum theoretical force is 82 kgf at 1.0 MPa.
A screw-tunable needle traps exhaust air at both stroke ends to decelerate the piston smoothly. You dial it to match your load and speed, cutting impact noise. It only decelerates near the ends and does not lock or hold position without air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X350SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.