Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA
The AirTAC MBLC32X60SCA is a double-acting, 32mm bore aluminum mini cylinder with a 60mm stroke. It generates 402 N of push force and 346 N of pull force at 0.5 MPa. Unlike the base MBL, this MBLC variant features a screw-adjustable pneumatic air cushion at both stroke ends. You tune the needle to smoothly decelerate the payload, minimizing end-cover impact and vibration on faster cycles without acting as a load lock.
This specific SKU includes a CA pivot clevis back cover that swings on a pin to accommodate arcing or angular loads, plus a built-in magnet (-S) for position detection. The riveted rolling-packed aluminum barrel keeps the body compact for tight machine layouts, while the 20 µm hard-chrome plated carbon-steel rod resists wear. The heterogeneous two-way grease-retaining piston seal maintains lubrication for the 30-800 mm/s speed range.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA Is Used
Textile Loom Guide
Drives a 60mm yarn guide arm on a weaving loom, using the CA pivot to absorb angular misalignment while the cushion prevents sudden thread snaps at 402 N force.
Pouch Sealing Clamp
Actuates a sealing jaw on a vertical form-fill-seal pouch machine, where the -S magnet confirms the 60mm close position and the air cushion softens the 346 N retract stop.
Carton Flap Folder
Folds corrugated carton flaps at high speed on a packaging line, relying on the tunable cushion to protect the aluminum end covers from repeated 563 N impact shocks.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA the Right Cylinder?
At 0.5 MPa, this 32mm bore yields 402 N push and 346 N pull. If you need less force, stepping down to the 25mm bore gives 245 N push / 206 N pull; if your payload is heavier, stepping up to the 40mm bore provides 628 N push / 528 N pull. Choose this MBLC over the fixed-bumper MBL when your application runs at higher speeds or cycles frequently and needs tunable end-of-stroke deceleration.
Because this is a plain pneumatic cylinder, it will not hold position if air is lost or the valve centers—the cushion only decelerates near the ends, it does not lock. For exact replacements, match the 32mm bore, 60mm stroke, G1/8 port, M10x1.25 rod thread, PT thread form, CA pivot cover, and the -S magnet. With a 60mm stroke, side-load risk is minimal, but always ensure the CA clevis pin is aligned to the direction of travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA FAQ
At 0.5 MPa, the 32mm bore provides 402 N push and 346 N pull. At 0.7 MPa, it yields 563 N push and 484 N pull. The maximum theoretical force is 82 kgf at 1.0 MPa.
The CA back cover is a clevis that swings on a pin to handle arcing loads. The -S code means a built-in magnet is fitted, allowing you to track rod position with AirTAC CMSG (reed), DMSG, or EMSG (electronic) sensor switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC32X60SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.