Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 100mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ63 mm
- Stroke100 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA
The AirTAC MBLC63X100CA is a double-acting aluminum mini cylinder equipped with a screw-adjustable pneumatic cushion at both ends. Delivering a substantial 1558 N push force at 0.5 MPa, this 63 mm bore unit is built to move heavier masses through a 100 mm stroke. The CA pivot clevis back cover allows the body to swing on a pin, accommodating arcing loads without binding. Because this specific SKU lacks the -S suffix, it has no internal magnet and cannot support CMSG, DMSG, or EMSG position sensing.
Unlike the fixed rubber bumper found on the standard MBL series, the MBLC needle valve lets you dial in end-of-stroke deceleration to protect the end covers during high-frequency cycling. The riveted rolling-packed aluminum barrel keeps the frame compact, while the Ø16 carbon-steel rod features a 20 µm hard-chrome plating to resist wear. A heterogeneous two-way grease-retaining piston seal maintains lubrication for consistent friction across the 30-800 mm/s speed range.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA Is Used
Stamping Press Feed
Pushes heavy coil stock into a stamping press. The 1558 N force drives the load, while the CA pivot absorbs the slight arcing motion of the feed arm and the air cushion prevents end-cap slam at high speed.
Pallet Diverter Arm
Actuates a heavy diverter gate on a packaging conveyor. The 100 mm stroke moves the gate clear, and the tunable cushion decelerates the 63 mm bore smoothly to protect the pivot bracket during continuous cycling.
Wood Crate Lid Press
Clamps timber lids onto crates. The 2181 N push force at 0.7 MPa secures the wood firmly, while the cushion needle is adjusted to bring the heavy load to a gentle stop without cracking the end cover.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA the Right Cylinder?
Choose this 63 mm bore when an application demands 1558 N of push force at 0.5 MPa. If you need less power, stepping down to the 50 mm bore yields 981 N of push force; stepping up is not possible as 63 mm is the largest standard MBL/MBLC size. Select the MBLC over the base MBL when your cycle speeds or moved masses outpace what a fixed rubber bumper can safely absorb. Remember that the adjustable air cushion only decelerates the piston near the stroke ends—it is not a locking mechanism, so the rod will drift if air pressure is lost or the valve centers.
For replacement, verify the 100 mm stroke, G1/4 port, PT thread form, and CA pivot back cover. The Ø16 rod and M14x1.5 rod-end thread are fixed by the 63 mm bore. Since this 100 mm stroke is well under the 500 mm standard maximum, side-load stress is manageable, but the CA clevis is specifically beneficial here for absorbing angular rod misalignment on arcing moves.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1558 N of push force and 1457 N of pull force. At 0.7 MPa, push increases to 2181 N. The maximum theoretical force is 318 kgf at 1.0 MPa. It uses a G1/4 port, a Ø16 rod, and an M14x1.5 rod-end thread.
No. Because the model code lacks the -S suffix, this specific SKU is manufactured without a built-in magnet and cannot host a CMSG, DMSG, or EMSG sensor switch. You would need the MBLC63X100CAS variant to enable electronic or reed position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X100CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.