Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100
The AirTAC Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100 is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø63mm bore and 100mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 1458 N each way at 0.5 MPa. Adjustable air cushion (both ends).
- BoreØ63 mm
- Stroke100 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionAdjustable air cushion (both ends)
About the Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100
The AirTAC MBLCD63X100 is a compact double-acting twin-rod mini cylinder featuring an adjustable air cushion at both ends. Because a Ø16 mm rod extends from each cover, the effective piston area is identical in both directions, yielding an equal extend and retract force of 1457 N at 0.5 MPa. This 100 mm stroke is well suited to moving heavier jigs or transferring substantial components without rotational deflection.
The screw-tunable end cushions allow you to dial in deceleration for fast 63 mm bore cycles, preventing end-cover impact that a fixed bumper cannot absorb. Note that this specific SKU lacks a built-in magnet, so it cannot support CMSG or DMSG position sensing. With a G1/4 port and a riveted aluminum barrel, the overall length extends by twice the stroke, requiring rear-rod clearance for the protruding platen.
Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100 Technical Specifications
| Model | Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø63mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100
| MBLCD | MBLCD aluminum-barrel double-rod mini cylinder with adjustable cushion. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLD (double rod, fixed bumper), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100 Is Used
Stamping Press Feeders
Pushes 2 mm gauge steel blanks into a progressive die with 1457 N of equal both-way force, resisting yaw during rapid 100 mm transfers.
Glass Panel Indexing
Synchronizes a dual-side lifting carriage for 15 kg automotive glazing, using the twin rods to prevent torsional binding.
Heavy Clamp Actuation
Secures dense cast iron engine blocks for machining, utilizing the adjustable cushion to soften the 100 mm stroke arrival.
Is the Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100 the Right Cylinder?
Stepping down to the 50 mm bore drops the both-way force to 881 N at 0.5 MPa, while no larger standard bore exists in this mini series, making the 63 mm the maximum power choice at 2040 N at 0.7 MPa. Choose the MBLCD over the bumper-only MBLD when your moving mass demands active end-of-stroke tuning. Mounting is restricted to Basic, FA flange, or LB foot options; there is no SDB pivot or back-cover provision. For drop-in replacements, match the 63 mm bore, 100 mm stroke, G1/4 port, PT thread, and confirm if a magnet (-S) is needed for sensor feedback.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100 FAQ
Because the rod occupies both sides, push and pull forces are equal: 1457 N at 0.5 MPa, 2040 N at 0.7 MPa, and a maximum theoretical 297 kgf at 1.0 MPa.
No, this specific SKU lacks the built-in magnet. To use CMSG reed or DMSG electronic switches, you must order the -S variant of the MBLCD63.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLCD Aluminum Alloy Mini Cylinder MBLCD63X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.