Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150 is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø32mm bore and 150mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 346 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150
The AirTAC MBLD32X150 is a double-acting, double-rod aluminum mini cylinder featuring a 32mm bore and 150mm stroke. Because a Ø12mm rod exits both end covers, the annulus piston area is identical on extend and retract. This yields equal force and speed in both directions, delivering 346N at 0.5MPa and 484N at 0.7MPa each way. The 150mm travel suits mid-range positioning tasks.
This configuration uses a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable air cushion. The riveted rolling-packed barrel and grease-retaining piston seal keep the compact body durable. Note that this specific SKU lacks a built-in magnet, so it cannot support CMSG, DMSG, or EMSG position sensors. The rear protruding rod requires A + 2 x stroke overall clearance and is ideal for mounting a secondary cam or position flag.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150 Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø32mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150 Is Used
PCB Edge-Trimming Fixture
Drives a high-speed routing spindle in and out of a panel at 346N both ways, using the rear rod to trip a dust-collection valve simultaneously.
Textile Guiding Mechanism
Shifts a yarn-guide bar 150mm across a loom; the twin rod resists torsional twisting from the thread tension better than a single shaft.
Packaging Deflector Arm
Pushes a cardboard diverter 150mm into a carton flow lane, with the opposing rod end holding a mechanical limit flag for cycle counting.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150 the Right Cylinder?
If you need less push, the adjacent MBLD25 bore provides 206N at 0.5MPa both ways. For heavier loads, step up to the MBLD40 bore, which yields 528N at 0.5MPa each direction. Mounting is limited to Basic, FA flange, or LB foot styles; there is no back-cover or SDB pivot option for the double-rod series. A plain MBLD does not hold position without live air—the rod drifts without an external lock. To replace this unit, match the 32mm bore, 150mm stroke, G1/8 port, PT thread, and non-magnet configuration.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150 FAQ
Being a double-rod cylinder, the extend and retract forces are equal because both sides have an identical annulus area. It generates 346N at 0.5MPa and 484N at 0.7MPa in both directions. The maximum theoretical force is 71kgf (approx. 696N) at 1.0MPa.
Unlike a single-rod MBL, the MBLD has a rod protruding from both ends, yielding equal push and pull forces and speeds. The rear rod can drive a second mechanism or hold a position flag. Also, this MBLD32X150 lacks a built-in magnet, so it cannot accept CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.