Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø32mm bore and 75mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 346 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S
The AirTAC MBLD32X75S is a compact double-acting double-rod aluminum mini cylinder. A single piston carries a Ø12mm carbon-steel rod out of both end covers, yielding exactly 346N of force at 0.5MPa on both extend and retract strokes. The 75mm stroke is well-suited for mid-travel indexing and transfer tasks. The built-in -S magnet allows CMSG, DMSG, or EMSG sensor switches to track position along the riveted aluminum barrel.
Because the effective annulus area is identical on both sides, push and pull speeds remain perfectly matched. The rear rod protrusion allows you to mount a position flag or cam on the opposite end from the primary workpiece, providing dual-side guidance that resists torsional rotation better than a single rod. End-of-travel impact is absorbed by a fixed rubber bumper, which softens the stop but does not mechanically lock the load in place when air is removed.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø32mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S Is Used
PCB Shuttle Conveyance
Drives a 75mm transfer shuttle in PCB assembly lines, using the 346N bidirectional force to push and pull carrier trays with equal cycle times.
Component Test Handler
Indexing electronic packages into a test socket, utilizing the rear rod end to trigger a CMSG reed switch for precise 75mm end-of-travel confirmation.
Film Edge Guiding
Tracks and corrects web alignment in packaging machinery, where the twin-rod construction prevents the guiding roller from twisting under load.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S the Right Cylinder?
If 346N is too much force, step down to the 25mm bore (206N at 0.5MPa); if your payload requires more thrust, step up to the 40mm bore (528N at 0.5MPa). Choose the MBLD over the single-rod MBL when equal extend/retract force, anti-rotation stability, or a rear-rod cam is required. For applications involving heavy end-of-stroke masses, consider the MBLCD variant, which replaces the fixed rubber bumper with an adjustable air cushion. Mounting is limited to Basic, FA flange, or LB foot brackets—there is no SDB pivot or back-cover option. To replace this unit, match the 32mm bore, 75mm stroke, G1/8 PT port, and the -S magnet specification.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S FAQ
The double-rod design provides equal force in both directions: 346N at 0.5MPa, 484N at 0.7MPa, and a maximum theoretical 71kgf at 1.0MPa.
A rod exits both ends, making the extend and retract annulus areas identical for perfectly matched speed and force. The rear rod can also drive a secondary mechanism or mount a position flag, and the twin rods resist rotational torque better than a single rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.