Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø63mm bore and 100mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 1458 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ63 mm
- Stroke100 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S
The AirTAC MBLD63X100S is a double-acting, double-rod aluminum mini cylinder featuring a 63mm bore and 100mm stroke. Because a Ø16mm carbon-steel rod protrudes from both end covers, the annulus area is identical on both sides. This yields equal push and pull forces, delivering 1457N each way at 0.5 MPa and 2040N at 0.7 MPa. The built-in magnet (-S) supports CMSG reed and DMSG/EMSG electronic sensors for position detection.
This 100mm travel unit uses a riveted rolling-packed barrel and a fixed rubber bumper to absorb end-of-stroke impact. The twin-rod layout provides inherent anti-rotation stability, allowing you to mount a primary workpiece on the front rod and a position flag or cam on the rear rod. Remember that the overall length equals the body plus twice the stroke, requiring rear-rod clearance.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø63mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S Is Used
Servo Press Peening
Drives a 100mm stroke peening pin in an automated die shop, using the 1457N equal both-way force to consistently strike and relieve metal stress without rotational torque.
PCB Stacking Alignment
Synchronizes a lifting tray in a PCB assembly machine, using the rear protruding rod to push a secondary guide rail while the twin rods prevent binding over the 100mm travel.
Textile Calender Guide
Positions a fabric spreader bar in a calendering line, relying on the 2040N retract force to pull heavy woven textiles flat without requiring a spring-return mechanism.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S the Right Cylinder?
If 1457N is excessive, step down to the 50mm bore MBLD, which provides 881N at 0.5 MPa. If you need more thrust, the 63mm is the largest in this mini range, so exceeding it requires an ISO 15552 cylinder. For high kinetic energy at this force, consider the MBLCD, which adds adjustable air cushions instead of the standard fixed rubber bumper. Mounting is limited to Basic, FA flange, or LB foot brackets—no back-cover or SDB pivot exists. A plain MBLD will drift without continuous air pressure; use an external lock for position holding. Replacement requires matching the 63mm bore, 100mm stroke, G1/4 port, PT thread, and magnet.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S FAQ
The double-rod design means force is identical in both directions. It delivers 1457N push and 1457N pull at 0.5 MPa, 2040N both ways at 0.7 MPa, and a maximum theoretical 297 kgf at 1.0 MPa.
The -S code indicates a built-in magnet for AirTAC CMSG (reed) and DMSG/EMSG (electronic) sensor switches to track position. The double-rod layout means a rod exits both ends, allowing you to mount a cam or limit flag on the rear rod while gaining superior anti-rotation guidance compared to a single-rod cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.