Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200 is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø63mm bore and 200mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 1458 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ63 mm
- Stroke200 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200
The AirTAC MBLD63X200 is a double-acting, double-rod aluminum mini cylinder featuring a 63 mm bore and 200 mm stroke. Because a Ø16 mm carbon-steel rod exits both end covers, the annulus piston area is identical on extend and retract. This yields exactly 1457 N of force each way at 0.5 MPa (2040 N at 0.7 MPa), providing perfectly balanced push and pull dynamics for heavy compact automation.
This 200 mm travel version uses a G1/4 port and a fixed rubber bumper to soften end-of-travel impact. The riveted rolling-packed barrel and two-way grease-retaining seal keep it compact for tight spaces. Note that this specific SKU lacks a built-in magnet, so it cannot support CMSG, DMSG, or EMSG position sensors. Overall length equals A + 2 x stroke, meaning the rear rod protrudes significantly and requires dedicated clearance to avoid collision.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200 Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø63mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200 Is Used
Printed Circuit Board Stacking
Drives a 200 mm vertical stacker for thick PCBs, using the rear rod end to simultaneously trip a mechanical limit flag for precise layer counting.
Textile Loom Tensioning
Applies 1457 N of perfectly balanced tension on both extend and retract strokes to guide heavy fabric webs through a dyeing machine without rotational drift.
Packaging Shear Blade
Powers a heavy-duty cutting blade that trims thick plastic film, utilizing the twin-rod anti-rotation property to keep the 200 mm stroke perfectly straight.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200 the Right Cylinder?
When sizing this model, consider stepping down to the 50 mm bore (881 N at 0.5 MPa) for lighter loads, or recognize 63 mm as the largest available MBLD size for maximum thrust in a mini format. If your application requires adjustable air cushioning instead of a fixed rubber bumper, select the MBLCD variant. For single-direction tasks where equal force is unnecessary, the standard MBL single-rod cylinder offers a simpler footprint.
Mounting is restricted to Basic, FA flange, or LB foot brackets; there is no back-cover or SDB pivot option. This base MBLD63X200 uses PT tapered thread and cannot hold a position without live air—it will drift if air supply is lost. To replace, match the 63 mm bore, 200 mm stroke, G1/4 port, PT thread, and lack of -S magnet. At 200 mm stroke, the twin 16 mm rods still need external guide support to prevent bending under high side loads.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200 FAQ
Because the double-rod design has equal piston area on both sides, extend and retract forces are identical: 1457 N at 0.5 MPa, 2040 N at 0.7 MPa, and a maximum theoretical output of 297 kgf at 1.0 MPa.
No, this specific MBLD63X200 SKU lacks the -S magnet code, meaning it cannot support CMSG, DMSG, or EMSG electronic switches. You must select an MBLD63X200S variant for position detection. The double-rod design also allows mounting a cam or flag on the rear rod for external mechanical tracking.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.