Airtac MDD Multi-position Double Rod Cylinder MDD10X35
The AirTAC Airtac MDD Multi-position Double Rod Cylinder MDD10X35 is a genuine MD multi-mount cylinder (double rod), 10 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 39.3 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double rod
- SeriesMD (standard)
- Bore10 mm
- Push thrust @0.5 MPa39.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDD Multi-position Double Rod Cylinder MDD10X35
The MDD10X35 is an AirTAC multi-mount cylinder whose compact square body can be fixed from 6 directions (front, back, left, right, top and bottom) and installed side by side with adjacent cylinders to save space. This double-rod double-acting model has a 10 mm bore and a 35 mm stroke, with a rod on each cover so it can act on two sides of a workpiece. At 0.5 MPa the theoretical push thrust is about 39.3 N, speed is 30-500 mm/s, and the cushion is a bumper. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and from -20 to 70 C.
This is a genuine AirTAC part from the MD family, the standard multi-mount series in which rod rotation is allowed; the MK family is the no-rotating alternative. This SKU carries no magnet, so the code has no trailing S. Magnetic-switch slots are still machined around the body if you later need detection, and no added lubricant is required. Overall dimensions and sizing details are stroke-dependent - we confirm them from the datasheet on request.
Airtac MDD Multi-position Double Rod Cylinder MDD10X35 Technical Specifications
| Model | Airtac MDD Multi-position Double Rod Cylinder MDD10X35 |
|---|---|
| Type | Multi-mount cylinder, double rod |
| Series | MD (standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 39.3 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the 10 mm bore if your force requirement sits within its 39.3 N theoretical push thrust at 0.5 MPa. MDD gives you a rod on both sides of the piston - the right choice when two opposed points must be driven at once. Acting type here is double acting; single-acting push and pull are separate MD variants. The 35 mm stroke is the maximum listed for the bore 10 double-acting table, so do not ask for a longer stroke on this body. This version is without magnet (no S); add the S suffix if you want built-in switch capability. Thread is PT (M5x0.8 on this bore), with G selectable. Send us side-load questions and we will answer from the datasheet.
Applications
Twin-side gate control
Mounted under a small slide gate, the double-rod body drives the gate from one rod while the opposite rod carries a switch or stop plate, all within a compact footprint.
Small-parts ejecting
Fixed horizontally from the fixture, the cylinder ejects finished parts from a nesting tray on one side while its second rod signals or resets on the other.
Jig locating pins
Twin rods advance and retract locating pins on both sides of a machining jig, with the 6-direction mounting letting the body tuck between adjacent jigs.
FAQ
Why choose MDD10X35 over a standard MD cylinder of the same bore?
The MDD is the double-rod variant: a rod leaves both covers, so one cylinder can drive or support two opposing points - handy for gates, ejectors and locating pins. Thrust for the 10 mm bore is about 39.3 N theoretical at 0.5 MPa on the push side, and the 35 mm stroke is the top of the bore 10 double-acting table. Operating pressure is 0.15-1.0 MPa (22-145 psi).
Is this cylinder magnetic, and how is it fixed in place?
No - MDD10X35 has no trailing S, so it is built without the magnet; switch slots are still provided around the body if you need detection later. Mounting is genuinely 6-way: the square body can be bolted from the front, back, left, right, top or bottom, and several units can sit side by side. Exact dimensions and side-load figures are per stroke - confirm them from the datasheet with us.