Airtac MDD Multi-position Double Rod Cylinder MDD10X35S
The AirTAC Airtac MDD Multi-position Double Rod Cylinder MDD10X35S is a genuine MD multi-mount cylinder (double rod), 10 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 39.3 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double rod
- SeriesMD (standard)
- Bore10 mm
- Push thrust @0.5 MPa39.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDD Multi-position Double Rod Cylinder MDD10X35S
The MDD10X35S is an AirTAC multi-mount cylinder with a compact square body that fixes from 6 directions (front, back, left, right, top and bottom) and mounts side by side with other units to save space. This double-rod double-acting model has a 10 mm bore and a 35 mm stroke, driving a rod from each cover so two opposed points can be actuated together. Theoretical push thrust at 0.5 MPa is about 39.3 N, speed is 30-500 mm/s, and cushioning is a bumper. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and from -20 to 70 C.
This is a genuine AirTAC part in the MD family, the standard multi-mount series where rod rotation is allowed; the MK family prevents rotation. The trailing S means this SKU includes the magnet, and the switch slots around the body are ready for position detection. No added lubricant is needed thanks to the high guide precision. Stroke-dependent dimensions and sizing are confirmed from the datasheet on request.
Airtac MDD Multi-position Double Rod Cylinder MDD10X35S Technical Specifications
| Model | Airtac MDD Multi-position Double Rod Cylinder MDD10X35S |
|---|---|
| Type | Multi-mount cylinder, double rod |
| Series | MD (standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 39.3 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the 10 mm bore when your load fits its 39.3 N theoretical push thrust at 0.5 MPa. The MDD double-rod construction suits jobs where both sides of the piston must push, hold or signal at once. Acting type is double acting here; single-acting push and pull are separate MD variants. The 35 mm stroke is the maximum in the bore 10 double-acting table, so longer strokes are not offered on this short-cover body. The S suffix means the magnet is included; order MDD10X35 without S for a non-magnetic build. Port thread is PT (M5x0.8 on this bore), with a G-thread version available. For side-load capacity, route the question to us and we confirm from the datasheet.
Applications
Small-parts clamping
Top- or side-mounted in a tight fixture, the twin rods clamp a light component from both sides while the magnet feeds a clamped-position signal to the controller.
Pick-and-place positioning
Fixed from the bottom face of a compact pick-and-place head, the cylinder lowers and supports small parts, with switch slots confirming end positions.
Dual-side eject and stop
One rod ejects a part from its nest while the opposite rod carries the stopper or sensor bracket, letting one double-rod cylinder do two jobs side by side.
FAQ
How do I read MDD10X35S and compare it with the MK version?
MDD = double rod (a rod on each cover), 10 = 10 mm bore, X35 = 35 mm stroke, S = built with magnet. MDD belongs to the MD standard family, where the rod is allowed to rotate; if your application must stop the rod turning - a plate or fixture carried on the rod - choose the MK family's double-rod model instead. Both share the 6-direction multi-mount body.
Can the stroke be extended beyond 35 mm on this bore?
No - for double-acting cylinders on a 10 mm bore the stroke table ends at 35 mm, and the MDD10X35S already sits at that maximum. Keeping the stroke at or below the table length preserves the short, compact covers that make side-by-side mounting possible. If your layout needs a different stroke or you need side-load and dimension figures, we will confirm the exact data from the datasheet.