Airtac MDD Multi-position Double Rod Cylinder MDD25X10
The AirTAC Airtac MDD Multi-position Double Rod Cylinder MDD25X10 is a genuine MD multi-mount cylinder (double rod), 25 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 245.4 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double rod
- SeriesMD (standard)
- Bore25 mm
- Push thrust @0.5 MPa245.4 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDD Multi-position Double Rod Cylinder MDD25X10
The AirTAC MD multi-mount family is a compact square-body cylinder that fixes from six directions - front, back, left, right, top and bottom - so units can sit side by side to save space, with magnetic-switch slots around the body and high guide precision without added lubricant. This MDD25X10 is the double-rod, double-acting variant: the rod leaves both covers, so the 25 mm bore can drive a load from either end over its 10 mm stroke, cushioned by a TPU bumper. Because both faces are rod sides, the theoretical rod-side thrust is about 206.2 N at 0.5 MPa, over an operating pressure of 0.15-1.0 MPa (22-145 psi) and speeds of 30-500 mm/s.
This is a genuine AirTAC part from the standard MD family - double rod, not the no-rotating MK type. The code has no trailing S, so this unit is supplied without a magnet; add the S to the same code if you want sensing at the switch slots. It runs on air filtered to 40 um between -20 and 70 C, with an M5x0.8 port and PT thread. We confirm dimensions and sizing details from the datasheet on request.
Airtac MDD Multi-position Double Rod Cylinder MDD25X10 Technical Specifications
| Model | Airtac MDD Multi-position Double Rod Cylinder MDD25X10 |
|---|---|
| Type | Multi-mount cylinder, double rod |
| Series | MD (standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 245.4 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 25 gives a theoretical rod-side thrust of about 206.2 N at 0.5 MPa on both rod ends; choose it when bore 20 is not enough force and a larger bore would be oversized. Stay in the MD family when rod rotation is acceptable; move to MK when rotation must be prevented. This MDD double-rod, double-acting variant gives a working face at each cover and air power in both directions at 30-500 mm/s. Strokes for bore 25 run up to 60 mm, but the short covers mean an over-long stroke wastes space, so keep to what the job needs - this 10 mm unit suits short, repeatable moves. The trailing S controls the magnet, which this SKU omits. Thread here is PT; G can be specified instead. Confirm side-load limits from the datasheet.
Applications
Small-parts clamping
Mount the cylinder to a fixture through whichever of the six faces is clear and use a rod end to clamp a small part against a stop, with the 10 mm stroke giving a fast, repeatable squeeze.
Jig alignment
Line units side by side inside a jig so one double rod nudges the workpiece square while the opposite rod end seats the locating block, all from one compact body.
Stopper on the line
Bolt the body to a conveyor side rail and use a rod end to pop up a short stopper blade that holds or releases small parts at a workstation.
FAQ
Does MDD25X10 include a magnet?
No. The code has no trailing S, so this cylinder is supplied without a magnet. If you need position sensing through the switch slots on the body, order the S version of the same bore and stroke instead.
Which ways can I mount this cylinder?
The square multi-mount body can be fixed from the front, back, left, right, top or bottom, and several units can be mounted side by side to save space. Overall dimensions depend on the stroke, so confirm the exact figures from the datasheet.