Airtac MDD Multi-position Double Rod Cylinder MDD32X10
The AirTAC Airtac MDD Multi-position Double Rod Cylinder MDD32X10 is a genuine MD multi-mount cylinder (double rod), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double rod
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDD Multi-position Double Rod Cylinder MDD32X10
The AirTAC MDD32X10 is a compact multi-mount cylinder with a 32 mm bore and a short 10 mm stroke. The square body fixes from six directions - front, back, left, right, top and bottom - so units mount side by side to save space, with magnetic-switch slots provided around the body. As a double-rod variant it extends a rod from both faces, so a single cylinder can push from either side of the mount. The cushion is a bumper, and at 0.5 MPa the bore produces about 402.1 N of theoretical push - the strongest in this series.
This is a genuine AirTAC part in the standard MD family, so rod rotation is not actively prevented; the MK family is the no-rotating option. This SKU carries no magnet code, so it is supplied without a magnet; an S-suffixed version with magnet is available. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with no added lubricant. Dimensions and sizing for this exact stroke are confirmed from the datasheet on request.
Airtac MDD Multi-position Double Rod Cylinder MDD32X10 Technical Specifications
| Model | Airtac MDD Multi-position Double Rod Cylinder MDD32X10 |
|---|---|
| Type | Multi-mount cylinder, double rod |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the 32 mm bore when you need the most thrust in the series: about 402.1 N theoretical push at 0.5 MPa. The double-rod MDD format gives you a working rod on both faces. If the rod must not rotate, move to the MK family; the standard MD allows rotation. This 10 mm stroke sits well inside the 60 mm maximum for this bore, and the short cover design means you should not over-specify stroke the job does not need. No magnet on this SKU; add the S suffix for one. Ports are 1/8" with PT thread as standard, G selectable.
Side-load limits and exact dimensions at this stroke come from the datasheet - route those questions to us.
Applications
Short-stroke press fit
A 10 mm stroke with about 402 N of push at 0.5 MPa suits pressing bearings, pins or bushings into small housings on a compact bench fixture.
Pallet clamp on both faces
The double-rod output clamps a workpiece pallet from one face while the opposite rod drives a locating pin, all from one cylinder in a tight fixture.
Push-off divert on a line
Mounted beside a conveyor, the short 10 mm stroke flicks small parts off the belt into a chute or reject lane without intruding into adjacent machinery.
FAQ
This SKU has no S at the end - does that mean anything?
Yes. The trailing S denotes the built-in position-detection magnet. MDD32X10 without the S is supplied without a magnet; MDD32X10S is the same cylinder with one fitted. Both use the magnetic-switch slots around the body when a sensor is added.
Is the 10 mm stroke a limit I should worry about?
The short cover design keeps this cylinder compact, which is why strokes should be kept to what the job needs rather than ordered long. This 10 mm stroke is well within the 60 mm maximum for a 32 mm bore. Exact dimensions for the chosen stroke and any side-load figures come from the datasheet - ask us to confirm them.