Airtac MDD Multi-position Double Rod Cylinder MDD6X10
The AirTAC Airtac MDD Multi-position Double Rod Cylinder MDD6X10 is a genuine MD multi-mount cylinder (double rod), 6 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 14.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double rod
- SeriesMD (standard)
- Bore6 mm
- Push thrust @0.5 MPa14.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDD Multi-position Double Rod Cylinder MDD6X10
The MDD6X10 is an AirTAC MD-series multi-mount cylinder: a compact square-body, double-acting, double-rod unit you can fix from 6 directions (front, back, left, right, top and bottom) and mount side by side to save space. The 6 mm bore with a 10 mm stroke suits short, light-duty strokes; at 0.5 MPa the bore delivers a theoretical 14.1 N push and 10.6 N pull through each rod, and the cushion is a bumper. Magnetic-switch slots are arranged around the body, and the guide precision is high enough that no added lubricant is needed.
This is a genuine AirTAC part in the standard MD family (the MK family is the no-rotating version). This SKU has no magnet, as shown by the absence of an S suffix. We confirm exact dimensions and sizing from the datasheet on request.
Airtac MDD Multi-position Double Rod Cylinder MDD6X10 Technical Specifications
| Model | Airtac MDD Multi-position Double Rod Cylinder MDD6X10 |
|---|---|
| Type | Multi-mount cylinder, double rod |
| Series | MD (standard) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 14.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the 6 mm bore when your job needs only about 14.1 N of push (10.6 N pull at 0.5 MPa); larger bores in the MD/MDD range give more thrust. The MD family is the standard type where rod rotation is allowed; pick MK if you must prevent rotation. This MDD double-rod unit is double acting, with rods on both sides. Strokes for 6 mm bore double-acting units run up to 35 mm, so the 10 mm stroke is well inside the table; the short cover is a reason not to specify an over-long stroke. This SKU has no magnet (choose an S suffix if you need one) and a PT thread; G is available.
Applications
Small-parts clamp
Clamp tiny components in a fixture using the compact 6 mm bore; the square body fixes from any of 6 directions so the clamp bolts in wherever the jig allows.
Jig positioning
Side-by-side mounting lets several MDD6X10 units sit close together on a jig, each advancing a locator pin with a short 10 mm stroke.
Dual-sided eject
The double-rod body can push workpieces or sensors from either face of the cylinder, doubling function in the same narrow footprint.
FAQ
What does the MDD6X10 code mean?
MDD is the AirTAC MD-family double-rod variant, double acting, with rods on both ends; 6 is the bore in mm and 10 is the stroke in mm. No trailing S means this SKU is without a magnet, and no trailing G means the port thread is PT. Port size on 6 mm bore is M5x0.8.
Can I mount this cylinder from any side?
Yes. The multi-mount square body fixes from 6 directions (front, back, left, right, top and bottom) and units mount side by side to save space. For exact overall dimensions at your stroke, or for allowable side-load figures, confirm from the datasheet or ask us.