Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC
Delivering 402.2 N of push force at 0.5 MPa, this double-acting JIS-standard round-body mini cylinder is built for demanding mid-range tasks. The SUS304 stainless steel barrel and riveted aluminium covers resist mild corrosion and washdown, while the two-way piston seal retains an oil film for extended mechanical life. Because the MF body is shorter than a comparable ISO 6432 unit for the same 32 mm bore and 200 mm stroke, it saves valuable mounting length in tight machinery.
This SKU features a 1/4" port, an M10x1.25 male rod thread, and a U flat-end back cover paired with a TC trunnion mount. It uses fixed TPU bumper pads to soften stroke-end impact rather than an adjustable air cushion. Plan for roughly 241 N of actual work at 0.5 MPa, which means it lifts about 20.5 kg vertically with a 2:1 safety margin. Note that this specific model lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG position switches.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC Is Used
Package Diverting Gate
Actuates a routing flap on a 200 mm stroke to redirect medium-weight cartons on a packaging line, utilising the 402.2 N push force to overcome guide friction.
CNC Lathe Door Indexing
Opens and closes a sliding safety enclosure where the compact JIS body length saves axial space, and the SUS304 barrel withstands splashed coolant.
Tote Stack Separation
Pushes empty plastic totes apart at a depalletiser station, lifting or shifting loads safely under the calculated 20.5 kg vertical working threshold.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC the Right Cylinder?
When sizing this 32 mm bore, the smaller MF25 provides 245.3 N at 0.5 MPa, while the larger MF40 offers 628.3 N at 0.5 MPa. If your fixture requires position feedback, you must select the -S magnet version, as this base SKU cannot host a sensor. The 200 mm stroke operates safely within the 500 mm standard limit, though long strokes demand careful alignment to prevent rod bending and premature seal wear.
Remember that a standard cylinder drifts when air is lost or the valve is centred; the TPU pads only decelerate the stroke end and never act as a brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve in the air circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC FAQ
The 32 mm bore provides a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. This unit features a 1/4" air port and an M10x1.25 male rod thread.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG switches. You must order the -S variant for position sensing. Additionally, the fixed TPU bumper pads only decelerate the stroke end; they do not function as an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200UTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.