Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 300mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke300 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB
Delivering 402.2 N of push force at 0.5 MPa, this double-acting JIS-standard round-body mini cylinder integrates an LB foot mount and a CM round-end rear cover. The SUS304 stainless barrel and riveted aluminium covers resist mild corrosion and washdown environments, while the two-way piston seal retains an oil film for prolonged operational life. Because the MF body is physically shorter than a comparable ISO 6432 cylinder at the same 300 mm stroke, it provides a tangible packaging advantage in tight machinery.
The 32 mm bore operates on a 1/4" port with a 12 mm rod, and the integrated -S magnet enables CMSG, DMSG, or EMSG switches for position sensing. Fixed TPU bumper pads alongside a front-cover anti-impact pad soften stroke-end impacts without offering adjustable cushioning. Plan for roughly 241 N of actual work at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB Is Used
Carton Diverting
Actuates a routing flap on a packaging conveyor to sort packed cartons into secondary lanes using its 402.2 N push capacity.
Pallet Push-Off
Uses the 300 mm stroke to push accumulated totes off a roller bed onto an adjacent palletizing station.
Clamp Actuation
Secures aluminium extrusions in a machining fixture, taking advantage of the short JIS body length to fit within a compact cell.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB the Right Cylinder?
When sizing this 32 mm bore, stepping down to the MF25 yields 245.3 N of push force at 0.5 MPa, whereas stepping up to the MF40 provides 628.3 N. This model strikes a balance for medium-duty handling. At 300 mm of stroke, minimize side loads to prevent rod bending and premature seal wear. If the air supply drops or the valve is centred, the piston will drift and drop the load, as the TPU pads only decelerate the end of travel rather than locking the rod; install a pilot-operated check valve or external rod lock to hold a suspended weight.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB FAQ
This 32 mm bore cylinder features a 1/4" port and generates 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
It is a JIS-standard round-body cylinder that is physically shorter than an ISO 6432 unit for the same stroke, but it does not conform to the ISO standard. It cannot hold a vertical load on air loss; the fixed TPU bumpers only decelerate the stroke end, so a pilot check valve is required for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X300SCMLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.