Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U
Generating 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore cylinder is built for tight machinery layouts. Because the MF body is physically shorter than an ISO 6432 cylinder for the exact same 60 mm stroke, it drops right into compact assemblies without sacrificing travel. The SUS304 stainless steel barrel and riveted aluminium covers naturally resist mild corrosion and routine washdowns.
This specific U-style unit features a flat-end rear cover and uses a 1/4 inch port paired with an M10x1.25 male rod thread. Fixed TPU bumper pads soften the impact at both stroke ends, while the internal two-way seal retains an oil film for extended mechanical life. Plan for roughly 241 N of actual work at 0.5 MPa, which safely lifts about 20.5 kg vertically with a 2:1 margin.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U Is Used
Carton Diverting Gate
Actuates a lightweight routing flap on a packaging conveyor, using the 60 mm stroke to push corrugated boxes onto a secondary belt without stalling.
Clamp Actuation
Secures aluminium extrusions in a CNC machining cell, applying 402.2 N of clamping pressure at 0.5 MPa to hold parts firmly during milling operations.
Vertical Parts Lift
Raises small steel brackets between processing tiers, safely lifting loads up to 20.5 kg with a 2:1 safety margin before retracting for the next cycle.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U the Right Cylinder?
If your fixture requires less push, dropping down to the MF25 provides 245.3 N at 0.5 MPa, whereas stepping up to the MF40 yields 628.3 N for heavier indexing. The U flat-end back cover mounts flush against stationary frames, and you can pair the body with LB foot brackets or TC trunnion hardware if the pivot geometry changes.
Remember that a standard double-acting cylinder drifts when air pressure is removed or the control valve centres; the TPU bumpers only decelerate the stroke end and will not brake a suspended mass. Install a pilot-operated check valve or an external rod lock if the payload must hold position. Because this SKU lacks the S magnet suffix, it cannot accept CMSG, DMSG, or EMSG position switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U FAQ
The 32 mm bore generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. Its theoretical maximum force is 82 kgf at 1.0 MPa. Air is supplied through a 1/4 inch port, and the piston rod features an M10x1.25 male thread.
No, because this specific SKU lacks the S suffix, it has no internal magnet and cannot accept CMSG, DMSG, or EMSG switches. You would need the MF32X60US variant for reed or solid-state sensing. The U flat-end rear cover also allows flush mounting against machine frames.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.