Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA is a genuine double acting JIS-standard round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA
Delivering 628.3 N of push force at 0.5 MPa, this double-acting JIS-standard round-body mini cylinder handles heavy-duty positioning in tight spaces. Its SUS304 stainless-steel barrel and riveted aluminium covers resist mild corrosion and washdown environments. The body is deliberately shorter than an equivalent ISO 6432 cylinder, saving valuable mounting length without sacrificing the 128.1 kgf theoretical maximum output at 1.0 MPa.
The piston relies on a heterogeneous two-way seal that retains an oil film for long service life, while fixed TPU bumper pads and a front-cover anti-impact pad soften stroke-end impacts. Because it yields about 377 N of actual work at 0.5 MPa, you can expect it to safely lift roughly 32 kg vertically against gravity. The integrated -S magnet supports CMSG, DMSG, and EMSG position sensing.
Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA Is Used
Stamping Press Feed
Clamps heavy steel blanks into a mechanical press using the 628.3 N push force, with the short 60 mm stroke ensuring a rapid high-speed clamping cycle.
Pallet Drop Station
Lowers loaded packaging pallets weighing up to 32 kg safely, relying on the fixed TPU bumper pads to absorb the impact energy at the bottom of the 60 mm stroke.
Heavy Diverter Gate
Swings a robust routing gate on a packaging conveyor via the CA pivot mount, using the integrated magnet to confirm gate position with DMSG sensors.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA the Right Cylinder?
When sizing this 40 mm bore unit, step down to the MF32 if your task only requires 402.2 N of push at 0.5 MPa, as 40 mm is the largest available bore in the MF family. The 1/4" port and M14x1.5 male rod thread provide high flow for rapid 30-800 mm/s cycling. The CA rear pivot cover suits articulated rod-end loading, but a plain cylinder drifts when air is lost or a valve is centered; the bumpers only decelerate the end of stroke and will not hold a load. For vertical safety, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA FAQ
This 40 mm bore double-acting cylinder features a 1/4" air port and an M14x1.5 male rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum output of 128.1 kgf at 1.0 MPa.
The JIS-standard SUS304 stainless round body is physically shorter than an ISO 6432 cylinder for the same 40x60 dimensions, saving fixture space. The CA rear cover provides a pivot mounting point, and the integrated -S magnet allows direct mounting of CMSG or EMSG switches for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.