Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC is a genuine double acting JIS-standard round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC
Delivering 628.3 N of push force at 0.5 MPa, this 40 mm bore double-acting actuator handles demanding clamping and lifting tasks. The JIS-standard round-body design is physically shorter than a comparable ISO 6432 cylinder for the same 60 mm stroke, yielding a tighter footprint in crowded machinery. Its SUS304 stainless steel barrel and riveted aluminium covers resist mild corrosion and washdown environments.
Because the piston employs a heterogeneous two-way seal with an oil-reservoir function, internal lubrication is maintained for a long service life. Fixed TPU bumper pads at both ends soften the stroke-end impact, though they decelerate rather than provide adjustable cushioning. Plan for a real working load of roughly 377 N, which safely lifts about 32 kg vertically with a 2:1 margin. Note that this specific SKU lacks a magnet, so it cannot support CMSG, DMSG, or EMSG sensors.
Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC Is Used
Stamping Press Ejection
Pushes formed metal blanks out of a die using the full 879.6 N available at 0.7 MPa, ensuring reliable part release in high-speed stamping lines.
Heavy Package Diversion
Actuates a pivoting routing gate via the TC trunnion mount to deflect heavier cartons onto a secondary packing conveyor.
Pallet Stopper Arm
Deploys a 60 mm stroke mechanical stop to halt loaded pallets at a workstation, utilizing the compact JIS body length to fit within tight frame gaps.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC the Right Cylinder?
When sizing this 40 mm bore actuator, verify your actual load requirements against the 628.3 N push force at 0.5 MPa. If your application is lighter, stepping down to the 32 mm bore reduces the footprint while still providing 402.2 N of push force. As 40 mm is the largest available bore in the MF series, heavier demands beyond this capacity will require a different cylinder family entirely.
This model features a U flat-end back cover and uses a TC trunnion mount, which accommodates pivoting loads. Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centred; the bumpers only soften the end of stroke and will not act as a brake. To suspend a load safely during an air loss event, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC FAQ
This 40 mm bore cylinder has a 1/4" port and an M14x1.5 male rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot accommodate CMSG, DMSG, or EMSG magnetic switches. You would need the -S variant for position sensing. The unit features a SUS304 stainless barrel and fixed TPU bumper pads rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60UTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.