Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 105mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke105 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM
Delivering 402.2 N of push force at 0.5 MPa, this 32 mm bore double-acting mini cylinder relies on a needle-set variable air cushion at both ends to absorb high-speed shocks. The riveted aluminium covers and SUS304 stainless barrel resist mild corrosion and washdown, while the CM round-end rear cover completes the JIS-standard round-body build. For the same bore and stroke, this unit is noticeably shorter than an ISO 6432 cylinder, saving valuable mounting length.
Because the SKU includes the -S suffix, a built-in piston magnet enables position sensing with CMSG, DMSG, or EMSG switches. Driven by a 1/4" port and a 12 mm rod with an M10x1.25 male thread, it handles a safe working load of roughly 241 N. In vertical setups, it lifts about 20.5 kg with a 2:1 safety margin. The cushion only decelerates the piston near stroke end; it is not a brake.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM Is Used
Package Diverting
Uses the 402.2 N thrust to push parcels onto secondary lines at speed, with the variable cushion preventing harsh slams at the 105 mm stroke end.
Light Press Fit
Ideal for seating small bearings, relying on the 241 N safe working load and needle-adjusted deceleration to avoid damaging delicate components.
Vertical Lift Gate
Raises a 20.5 kg access panel with a 2:1 safety margin, where the shorter JIS body saves headroom compared to standard ISO 6432 units.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM the Right Cylinder?
When sizing this 32 mm bore, step down to the MFC25 for 245.3 N @0.5 MPa if your load is lighter, or move up to the MFC40 for 628.3 N @0.5 MPa when you need heavier thrust. The adjustable air cushion is essential when cycling at high speeds or moving substantial mass, letting you dial in the exact deceleration to protect the workpiece. If the application must hold position during air loss or valve centering, note that the piston will drift; you should add an external rod lock or pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM FAQ
This 32 mm bore cylinder has a 1/4" port and generates 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the piston will drift on air loss. The variable air cushion only decelerates the piston near the stroke end; it is not a lock or brake. For holding a vertical load, you must install an external rod lock or pilot check valve. The -S magnet allows CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X105SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.