Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 375mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke375 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore mini cylinder tackles heavier duty cycles without the bulk of a tie-rod body. A needle-set variable air cushion at both ends soaks up end-of-stroke kinetic energy, letting you run at speeds up to 800 mm/s while protecting the payload from impact shock. The riveted aluminium covers and SUS304 stainless barrel shrug off mild corrosion and washdown environments.
For the same 375 mm stroke and 32 mm bore, the JIS-standard round-body housing is physically shorter than a comparable ISO 6432 cylinder, saving valuable machine footprint. This specific CM round-end rear cover configuration uses a 1/4" port and an M10x1.25 male rod thread. Because this SKU lacks the -S magnet option, it cannot accept CMSG, DMSG or EMSG position switches. Factoring a 60% safety margin on the 0.5 MPa thrust yields a safe working load of roughly 241 N, which translates to lifting about 20.5 kg vertically with a 2:1 ratio.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM Is Used
High-Speed Carton Diverting
Uses the 402.2 N thrust to push heavy packaging off a fast belt, relying on the needle-set air cushion to stop the 375 mm stroke silently without slamming.
Automated Component Pressing
Drives light-duty assembly pins into housings where a 241 N safe working load is required, with the CM rear cover allowing compact pivot mounting.
Vertical Material Lift
Raises small fixtures weighing up to 20.5 kg in a 2:1 margin setup, taking advantage of the shorter JIS body length to save vertical headroom.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM the Right Cylinder?
If 245.3 N from the MFC25 is insufficient for your load, this 32 mm bore steps up the thrust to 402.2 N at 0.5 MPa; should you need even more power, the MFC40 pushes 628.3 N. The adjustable air cushion is essential when moving heavy masses at high velocity, as it decelerates the piston smoothly right before the end caps. Note that the cushion only slows the stroke and does not brake or lock the rod—if power drops, the piston drifts, so fit an external rod lock or pilot check valve to hold a suspended load. You can mount this unit via LB foot, FA flange, SDB pivot or TC trunnion, but remember this non-magnet version cannot host sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM FAQ
This 32 mm bore double-acting cylinder pushes 402.2 N and pulls 345.6 N at 0.5 MPa, and pushes 563 N while pulling 483.8 N at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa. It features a 1/4" air port, a 12 mm piston rod, and an M10x1.25 male rod thread.
No, this specific SKU does not include the -S magnet, so it cannot host CMSG, DMSG or EMSG switches. You would need the -S variant for sensing. The SUS304 stainless build resists mild corrosion, and the variable air cushion at both ends only decelerates the piston near the stroke end—it will not lock or hold the load if air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X375CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.