Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore mini cylinder relies on a needle-set variable air cushion at both ends to decelerate high-speed strokes smoothly. The riveted SUS304 stainless barrel and aluminium covers resist mild corrosion and washdown, while the CM round-end rear cover keeps the footprint neat. For the same bore and stroke, this JIS-standard body is noticeably shorter than an ISO 6432 cylinder, saving valuable mounting length.
Driven by a 1/4" air port and a 12 mm rod with an M10x1.25 male thread, it handles a safe working load of roughly 241 N. That translates to lifting about 20.5 kg vertically with a 2:1 safety margin. Note this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMG sensors.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM Is Used
Package Diverting
Shifts medium-weight cartons at speed, using the adjustable air cushion to stop the 60 mm stroke softly without jarring the conveyor frame.
Light Pressing
Applies up to 402.2 N of push force for seating small bearings, with the needle valve tuned to prevent bounce at the stroke end.
Vertical Lift Stops
Raises a 20 kg fixture reliably; pair with a pilot check valve to prevent the load from dropping if compressed air is lost.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM the Right Cylinder?
When sizing this 32 mm bore, step down to an MFC25 for 245.3 N @0.5 MPa if your load is lighter, or move up to an MFC40 for 628.3 N @0.5 MPa when you need 628 N of push. The variable air cushion is essential for heavy or fast-moving loads, allowing you to dial in the end-of-stroke deceleration. Remember the cushion only slows the piston near the end of travel; it is not a brake. If the air supply drops, the piston will drift, so fit an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, SDB pivot or TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM FAQ
This 32 mm bore double-acting cylinder uses a 1/4" air port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot host CMSG, DMSG or EMG switches. You would need the -S variant for position sensing. The SUS304 stainless build and variable air cushion still make it highly durable for high-speed work.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X60CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.