Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore mini cylinder uses a needle-set variable air cushion at both ends to absorb high-speed end-of-stroke shock. The riveted SUS304 stainless barrel and aluminium covers resist mild corrosion and washdown, while the JIS-standard round body is physically shorter than an ISO 6432 cylinder for the same 75 mm stroke, saving valuable mounting length.
Equipped with a built-in piston magnet (-S), it supports CMSG, DMSG and EMSG switches for precise position detection. A CM round-end rear cover completes the assembly. For practical sizing, its safe working load is roughly 241 N, meaning it can lift about 20.5 kg vertically with a 2:1 safety margin. The 1/4" port and M10x1.25 male rod thread ensure robust pneumatic and mechanical connections.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM Is Used
Package Diverting
Pushes parcels smoothly off a high-speed belt using the 402.2 N thrust, with the variable air cushion preventing harsh impacts at the 75 mm stroke end.
Component Seating
Seats lightweight machined parts into fixtures, relying on the 241 N safe working load and needle-adjusted deceleration to avoid damaging delicate surfaces.
Vertical Lift Stops
Raises goods up to 20.5 kg in compact palletising cells where the shorter-than-ISO-6432 body length is critical for tight machine envelopes.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM the Right Cylinder?
If 402.2 N at 0.5 MPa is excessive for your payload, step down to the MFC25 which provides 245.3 N; if your application demands more thrust, the MFC40 offers 628.3 N. The adjustable air cushion is essential when cycling at high speeds or moving heavy masses, as it decelerates the piston smoothly to protect the load. Note that this cushion only slows the piston near the stroke end and does not function as a brake; the piston will drift on air loss. For secure load holding, fit an external rod lock or pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot and TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM FAQ
This 32 mm bore cylinder features a 1/4" port and an M10x1.25 male rod thread. At 0.5 MPa it generates 402.2 N of push force and 345.6 N of pull force. At 0.7 MPa the push increases to 563 N and the pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the piston will drift if air is lost. The variable air cushion at both ends only decelerates the piston near the end of the stroke to reduce shock; it is not a lock or brake. To hold a load securely, you must use an external rod lock or a pilot-operated check valve. The included -S magnet allows CMSG, DMSG or EMSG sensors to confirm position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.