Airtac MG Stainless Steel Mini Air Cylinder MG32X150
The AirTAC Airtac MG Stainless Steel Mini Air Cylinder MG32X150 is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
About the Airtac MG Stainless Steel Mini Air Cylinder MG32X150
With a 32 mm bore and 150 mm stroke, this MG delivers 402.2 N push and 345.6 N pull at 0.5 MPa, rising to 563 N and 483.8 N at 0.7 MPa, for a theoretical peak of 82 kgf at 1.0 MPa. It is a double acting, JIS-standard round-body mini cylinder: air drives the rod out and back, and a fixed anti-impact bumper pad at each stroke end softens the direction change. The bumper only decelerates - it is not an adjustable air cushion, which is the MGC variant.
The barrel is SUS304 stainless steel, riveted onto the covers with a stainless block, while the 12 mm piston rod carries a 20 um hard-chrome plating - a combination that shrugs off damp, washdown and outdoor conditions far better than painted-steel minis. In practice, plan on roughly 240 N (about 24 kgf) of usable push at 0.5 MPa, enough to lift around 20 kg vertically with a 2:1 margin. Note that the rod is not held when air is lost: for a load that must stay put, add an external rod lock or a pilot check valve.
Airtac MG Stainless Steel Mini Air Cylinder MG32X150 Technical Specifications
| Model | Airtac MG Stainless Steel Mini Air Cylinder MG32X150 |
|---|---|
| Series | MG JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MG-series (JIS standard) datasheet. Barrel: SUS304 stainless steel (round-body, riveted construction); piston rod: carbon steel with 20µm hard-chrome plating. Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MG Stainless Steel Mini Air Cylinder MG32X150
| MG | JIS round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
| FA / LB / CB / SDB | Mounting: FA flange, LB foot, CB clevis, SDB pivot bracket (with CB). |
MG-family variants: MG / MGC (double acting ±cushion), MSG / MTG (single acting push / pull), MGD / MGCD (double rod ±cushion). Accessories: LB foot, FA flange, CB clevis, SDB pivot block, plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MG Stainless Steel Mini Air Cylinder MG32X150 Is Used
Small press and forming stations
The 402.2 N push at 0.5 MPa (563 N at 0.7 MPa) suits light staking, marking and crimping heads on bench-top assembly machines where a compact round body is required.
Packaging line pushers
A 150 mm stroke with 30-800 mm/s speed makes this cylinder a natural side pusher or lane diverter on food and beverage conveyors, where the SUS304 barrel tolerates washdown splash.
Fixture clamping on machining jigs
With about 24 kgf of dependable working force at 0.5 MPa, the MG32X150 clamps brackets or castings in drilling and tapping fixtures; add a pilot check valve if the clamp must hold through an air loss.
Is the Airtac MG Stainless Steel Mini Air Cylinder MG32X150 the Right Cylinder?
At 402.2 N push at 0.5 MPa, the 32 mm bore sits between the 25 mm MG (245.3 N) and the 40 mm MG (628.3 N) - pick it when 25 mm feels marginal but 40 mm is oversized. If your cycle runs fast or carries heavier loads, step up to the cushioned MGC, which also reaches Dia 50 and 63 bores. This SKU has no S code, so no CMSG / DMSG / EMSG sensor can be fitted; order the magnet version if position detection matters. Mount it with LB foot, FA flange, CB clevis or SDB pivot brackets, and pair I or Y rod knuckles with the M10x1.25 male thread. At 150 mm stroke, keep side loads off the rod and guide the workpiece externally.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting (LB / FA / CB / SDB) & knuckle
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion/impact settings and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MG Stainless Steel Mini Air Cylinder MG32X150 FAQ
At 0.5 MPa it pushes with 402.2 N and pulls with 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and rod speed runs 30-800 mm/s.
No - this SKU lacks the built-in magnet (the optional S code), so CMSG, DMSG or EMSG switches cannot detect it; order an MG32X150S for sensing. Air supply connects through 1/8" ports, and the male rod thread is M10x1.25 on the 12 mm rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MG Stainless Steel Mini Air Cylinder MG32X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.