Airtac MG Stainless Steel Mini Air Cylinder MG32X200
The AirTAC Airtac MG Stainless Steel Mini Air Cylinder MG32X200 is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
About the Airtac MG Stainless Steel Mini Air Cylinder MG32X200
With a 32 mm bore and 200 mm stroke, this MG delivers about 402.2 N of push and 345.6 N of pull at 0.5 MPa, rising to 563 N at 0.7 MPa. It is a double acting, JIS-standard round-body mini cylinder: a SUS304 stainless barrel riveted to the covers with a hard-chrome plated 12 mm rod, so it shrugs off damp, washdown-prone spots that quickly ruin painted-steel minis.
The fixed anti-impact pad at each stroke end simply decelerates the rod - it is not an adjustable air cushion, and it will not hold a load if air is lost, so plan an external check valve or rod lock where holding matters. Because the body is JIS standard, standard mini-cylinder brackets and I/Y rod knuckles bolt straight on. At 0.5 MPa the push force equates to roughly 41 kgf, so halving for margin you can lift about 20 kg vertically with confidence.
Airtac MG Stainless Steel Mini Air Cylinder MG32X200 Technical Specifications
| Model | Airtac MG Stainless Steel Mini Air Cylinder MG32X200 |
|---|---|
| Series | MG JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MG-series (JIS standard) datasheet. Barrel: SUS304 stainless steel (round-body, riveted construction); piston rod: carbon steel with 20µm hard-chrome plating. Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MG Stainless Steel Mini Air Cylinder MG32X200
| MG | JIS round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
| FA / LB / CB / SDB | Mounting: FA flange, LB foot, CB clevis, SDB pivot bracket (with CB). |
MG-family variants: MG / MGC (double acting ±cushion), MSG / MTG (single acting push / pull), MGD / MGCD (double rod ±cushion). Accessories: LB foot, FA flange, CB clevis, SDB pivot block, plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MG Stainless Steel Mini Air Cylinder MG32X200 Is Used
Benchtop press fixture
The 402.2 N push at 0.5 MPa suits light staking, marking and snap-fit pressing on small aluminium or plastic parts in a cell-side jig.
Small-part lift station
With about 20 kg of safe vertical lift capacity at 0.5 MPa, the 200 mm stroke raises machined housings between a conveyor and an inspection tray.
Packaging line pusher
Running at up to 800 mm/s with 1/8" ports, it diverts cartons or blisters on a food-line conveyor, where the SUS304 barrel tolerates frequent washdown.
Is the Airtac MG Stainless Steel Mini Air Cylinder MG32X200 the Right Cylinder?
Size check: the 25 mm MG pushes about 245.3 N at 0.5 MPa, so step up to this 32 mm bore when your jig or lifter needs roughly 400 N; if that is still short, the 40 mm MG gives 628.3 N. The 200 mm stroke sits well inside the 500 mm standard range for this bore, so no made-to-order lead time applies. This SKU carries no S code, so it cannot accept a CMSG / DMSG / EMSG sensor - order the magnet version if you need position feedback. Mount it with LB foot, FA flange or CB clevis (SDB pivot pairs with CB). At 200 mm of stroke, keep side loads off the 12 mm rod or use a guide to protect the bearing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting (LB / FA / CB / SDB) & knuckle
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion/impact settings and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MG Stainless Steel Mini Air Cylinder MG32X200 FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-800 mm/s, and air filtered to 40 um.
Not as supplied - this model has no built-in magnet, so CMSG, DMSG or EMSG switches cannot detect it. Order the magnet-equipped S version of the same bore and stroke if you need end-of-stroke sensing, and note the fixed bumper pads only soften the stroke end; they are not an adjustable cushion or a load brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MG Stainless Steel Mini Air Cylinder MG32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.