Airtac MG Stainless Steel Mini Air Cylinder MG32X570
The AirTAC Airtac MG Stainless Steel Mini Air Cylinder MG32X570 is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 570mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke570 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
About the Airtac MG Stainless Steel Mini Air Cylinder MG32X570
With a 32 mm bore pushing 402.2 N at 0.5 MPa, the MG32X570 is a double acting JIS round-body mini cylinder built on a SUS304 stainless barrel riveted to its covers, with a hard-chrome plated 12 mm rod. The 570 mm stroke is longer than the 500 mm standard range, so it is made to order - worth specifying early in a project. A fixed anti-impact bumper pad at each end softens the direction change; it decelerates the stroke end only and is not an adjustable air cushion.
In practice, plan on roughly 240 N of usable push at 0.5 MPa (about 60% of the rating), which lifts around 24 kg vertically - or about 12 kg with a 2:1 margin. Because the body follows the JIS mini-cylinder standard, standard JIS brackets and rod knuckles fit without rework, a real spares advantage. Note that the rod drifts if air is lost, since nothing in a plain MG holds position; add an external rod lock or pilot check valve where a load must stay put.
Airtac MG Stainless Steel Mini Air Cylinder MG32X570 Technical Specifications
| Model | Airtac MG Stainless Steel Mini Air Cylinder MG32X570 |
|---|---|
| Series | MG JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MG-series (JIS standard) datasheet. Barrel: SUS304 stainless steel (round-body, riveted construction); piston rod: carbon steel with 20µm hard-chrome plating. Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MG Stainless Steel Mini Air Cylinder MG32X570
| MG | JIS round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
| FA / LB / CB / SDB | Mounting: FA flange, LB foot, CB clevis, SDB pivot bracket (with CB). |
MG-family variants: MG / MGC (double acting ±cushion), MSG / MTG (single acting push / pull), MGD / MGCD (double rod ±cushion). Accessories: LB foot, FA flange, CB clevis, SDB pivot block, plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MG Stainless Steel Mini Air Cylinder MG32X570 Is Used
Bottling line reject pusher
The 402.2 N push at 0.5 MPa ejects off-spec bottles or cartons sideways off a conveyor, and the stainless barrel survives repeated washdown in a wet bottling hall.
Packaging machine lid lift
Lifting about 12 kg carton lids vertically with a 2:1 margin, the long 570 mm stroke clears tall stack heights on a case-packing station.
Outdoor sample handling gate
The SUS304 barrel and chrome rod resist weather on an outdoor gate or sampler where painted aluminium minis corrode, driven at 30-800 mm/s.
Is the Airtac MG Stainless Steel Mini Air Cylinder MG32X570 the Right Cylinder?
At 0.5 MPa this bore delivers 402.2 N push and 345.6 N pull; the step down to a 25 mm bore gives only 245.3 N push, while stepping up means moving to the cushioned MGC series to reach 50 mm or 63 mm bores. If your cycle runs fast or carries heavier inertia, MGC with its variable air cushion is the better match. Mount with LB foot, FA flange, CB clevis or SDB pivot, and pair with I or Y rod knuckles. This SKU carries no S code, so it has no magnet and cannot accept CMSG, DMSG or EMSG switches - order an S variant if sensing is needed. With 570 mm of travel, keep side loads off the 12 mm rod and guide the load externally to avoid bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting (LB / FA / CB / SDB) & knuckle
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion/impact settings and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MG Stainless Steel Mini Air Cylinder MG32X570 FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa, 563 N push and 483.8 N pull. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa = 22-145 psi with 1.5 MPa = 215 psi proof pressure, and speed runs 30-800 mm/s.
Not on this SKU. It has no built-in magnet (no S code), so CMSG, DMSG or EMSG switches cannot detect position. Order an MG32X570S if you need sensing. Also note the 570 mm stroke is non-standard - above the 500 mm maximum for bore 32 - so it is produced to order.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MG Stainless Steel Mini Air Cylinder MG32X570
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.