Airtac MG Stainless Steel Mini Air Cylinder MG32X60
The AirTAC Airtac MG Stainless Steel Mini Air Cylinder MG32X60 is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
About the Airtac MG Stainless Steel Mini Air Cylinder MG32X60
Compact yet strong, the MG32X60 is a double acting JIS round-body mini cylinder with a 32 mm bore and a 60 mm stroke. Air drives the rod out and pulls it back, delivering 402.2 N of push and 345.6 N of pull at 0.5 MPa, rising to 563 N and 483.8 N at 0.7 MPa, with a theoretical peak of 82 kgf at 1.0 MPa. In practice, plan on roughly 241 N of usable work at 0.5 MPa, which means this cylinder lifts about 20 kg vertically with a comfortable 2:1 margin.
The barrel is SUS304 stainless steel with a hard-chrome plated rod, so it shrugs off damp, washdown and outdoor conditions far better than painted-steel minis. Because it follows the JIS mini-cylinder standard, its mounting footprint drops into standard JIS brackets and rod knuckles, making spares and redesigns painless. A fixed anti-impact bumper pad softens the stroke ends, and the riveted body keeps the whole unit short and light.
Airtac MG Stainless Steel Mini Air Cylinder MG32X60 Technical Specifications
| Model | Airtac MG Stainless Steel Mini Air Cylinder MG32X60 |
|---|---|
| Series | MG JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MG-series (JIS standard) datasheet. Barrel: SUS304 stainless steel (round-body, riveted construction); piston rod: carbon steel with 20µm hard-chrome plating. Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MG Stainless Steel Mini Air Cylinder MG32X60
| MG | JIS round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
| FA / LB / CB / SDB | Mounting: FA flange, LB foot, CB clevis, SDB pivot bracket (with CB). |
MG-family variants: MG / MGC (double acting ±cushion), MSG / MTG (single acting push / pull), MGD / MGCD (double rod ±cushion). Accessories: LB foot, FA flange, CB clevis, SDB pivot block, plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MG Stainless Steel Mini Air Cylinder MG32X60 Is Used
Carton clamp on packing lines
With about 241 N of usable push at 0.5 MPa, the 32 mm bore clamps cartons and trays firmly on a packaging conveyor without crushing, and the stainless barrel tolerates frequent wipe-downs.
Small press and forming fixture
The 563 N push at 0.7 MPa suits light staking, embossing and hole-forming jigs in electronics assembly, where the short 60 mm stroke keeps the fixture footprint tight.
Lab and test-rig actuation
Clean 30-800 mm/s motion and a corrosion-resistant SUS304 body make this cylinder a fit for sample-handling slides and test benches in laboratory equipment.
Is the Airtac MG Stainless Steel Mini Air Cylinder MG32X60 the Right Cylinder?
At 32 mm bore the MG32X60 sits mid-range: the 25 mm bore gives 245.3 N push at 0.5 MPa, while stepping up to 40 mm buys 628.3 N. Pick the 32 if your clamp or press load falls near the 241 N usable figure. If higher speeds or heavier loads hammer the stroke ends, the cushioned MGC in the same bore family is the better match. Note that a plain MG will drift if air is lost or the valve centres, so add an external rod lock or pilot check valve where a load must stay put. This SKU has no magnet, so position switches (CMSG / DMSG / EMSG) cannot be fitted; order the S code if sensing is needed. Mount it with LB foot, FA flange, CB clevis or SDB pivot brackets, and use I or Y knuckles on the 12 mm rod threaded M10x1.25.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting (LB / FA / CB / SDB) & knuckle
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion/impact settings and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MG Stainless Steel Mini Air Cylinder MG32X60 FAQ
At 0.5 MPa it pushes with 402.2 N and pulls with 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-800 mm/s, and the air must be filtered to 40 um. The 1/8" port, 12 mm rod and M10x1.25 male thread complete the picture.
Not on this SKU: it has no built-in magnet, so CMSG, DMSG or EMSG switches cannot be used. Order the S-code version (MG32X60S) if you need sensing. Mechanically it is a JIS-standard round-body mini cylinder with a riveted SUS304 stainless barrel, hard-chrome plated rod and fixed anti-impact bumper pads that soften the stroke ends; it is not a tie-rod design and the bumpers are not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MG Stainless Steel Mini Air Cylinder MG32X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.