Airtac MG Stainless Steel Mini Air Cylinder MG32X60S
The AirTAC Airtac MG Stainless Steel Mini Air Cylinder MG32X60S is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
About the Airtac MG Stainless Steel Mini Air Cylinder MG32X60S
Compact but punchy, the MG32X60S delivers about 402.2 N of push and 345.6 N of pull at 0.5 MPa in a double acting round body that follows the JIS mini-cylinder standard. Because the mounting and accessory footprint is JIS, standard brackets and rod knuckles drop straight on, which makes spares and redesigns painless. The SUS304 stainless barrel with a hard-chrome plated 12 mm rod shrugs off damp, washdown and outdoor conditions that quickly ruin painted-steel minis.
The riveted covers carry a fixed anti-impact bumper pad that softens the direction change at each stroke end - it decelerates, it is not an adjustable air cushion. The built-in magnet means CMSG, DMSG or EMSG switches can be clipped on for position feedback without ordering a special version. For planning: at 0.5 MPa treat roughly 240 N as the realistic working force, which corresponds to lifting about 24 kg vertically with a sensible margin.
Airtac MG Stainless Steel Mini Air Cylinder MG32X60S Technical Specifications
| Model | Airtac MG Stainless Steel Mini Air Cylinder MG32X60S |
|---|---|
| Series | MG JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MG-series (JIS standard) datasheet. Barrel: SUS304 stainless steel (round-body, riveted construction); piston rod: carbon steel with 20µm hard-chrome plating. Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MG Stainless Steel Mini Air Cylinder MG32X60S
| MG | JIS round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
| FA / LB / CB / SDB | Mounting: FA flange, LB foot, CB clevis, SDB pivot bracket (with CB). |
MG-family variants: MG / MGC (double acting ±cushion), MSG / MTG (single acting push / pull), MGD / MGCD (double rod ±cushion). Accessories: LB foot, FA flange, CB clevis, SDB pivot block, plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MG Stainless Steel Mini Air Cylinder MG32X60S Is Used
Carton push-off on packaging lines
With about 402.2 N push at 0.5 MPa, the 60 mm stroke sweeps filled cartons off a conveyor lane into a chute, and the stainless barrel copes with frequent wipe-downs.
Gated fixture clamping with feedback
The built-in magnet drives a CMSG or DMSG switch, so a machine PLC confirms the gate is fully clamped before a drilling or assembly cycle starts.
Sample tray indexing in lab automation
A short 60 mm throw and 30-800 mm/s speed range suit stepping sample trays between stations, where the compact JIS round body fits tight layouts.
Is the Airtac MG Stainless Steel Mini Air Cylinder MG32X60S the Right Cylinder?
At 32 mm bore this sits in the middle of the MG range: the 25 mm bore offers about 245.3 N push at 0.5 MPa, while the 40 mm bore raises that to about 628.3 N. If your load needs more than roughly 240 N of usable force, step up; if 245 N is enough, the smaller 25 mm bore saves air and space. The 60 mm stroke is well inside the 500 mm standard limit, so no made-to-order barrel is needed.
Match the mount to the job - LB foot, FA flange, CB clevis or SDB pivot with I and Y rod knuckles. Note that with the valve centred or air lost, the piston drifts freely; for a held load add an external rod lock or a pilot check valve. Running near 800 mm/s or moving heavy side loads? The cushioned MGC in the same bore is worth a look.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting (LB / FA / CB / SDB) & knuckle
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion/impact settings and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MG Stainless Steel Mini Air Cylinder MG32X60S FAQ
At 0.5 MPa it pushes with 402.2 N and pulls with 345.6 N. At 0.7 MPa those rise to 563 N push and 483.8 N pull. The theoretical maximum at 1.0 MPa is 82 kgf. Operating pressure is 0.15-1.0 MPa = 22-145 psi, proof pressure 1.5 MPa = 215 psi, speed 30-800 mm/s, port 1/8", rod 12 mm with M10x1.25 male thread.
Yes - the S in the model code means a magnet is built into the piston, so CMSG, DMSG or EMSG reed switches mount directly on the barrel. The body is a SUS304 stainless round barrel riveted to the covers with a hard-chrome plated rod, built to the JIS mini-cylinder standard, with fixed anti-impact bumper pads at each stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MG Stainless Steel Mini Air Cylinder MG32X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.